We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver aluminium mobile rack with four lockable trays for 2.5 inch SATA drives in a 5.25 inch bay

Syba

Syba SY-MRA25038 4 Bay 2.5" SATA Mobile Rack for 5.25" Bay ssd accessory

SKU CH-ZWZR-SCR50 MPN SY-MRA25038

Holds four 2.5" SATA drives in a single 5.25" bay with lockable trays and LED status indicators

  • Conversion Tray4 x 2.5" Drive to 5.25" Bay
  • Mobile Rack Drives SupportMulti 2.5" Drives to 5.25" Bay
  • Mobile Rack InterfaceSATA I/II/III
  • Protection CaseMultiple Drives
  • Compatible Products2.5"
  • FeaturesInterface Supports: SATA I/II/III (6 Gbps) Supports 2.5” SAT
  • Fits four 2.5″ drives in one 5.25″ bay
  • SATA I/II/III interface supports 6 Gbps transfer
  • Lockable removable trays secure each drive
  • Aluminium housing aids heat dissipation
  • LED indicators show power access and fan status

4-Bay 2.5" SATA Mobile Rack

The Syba SY-MRA25038 converts a single 5.25" bay into storage for four 2.5" SATA drives. It suits builders adding hot-swap capacity to a workstation or server chassis without occupying additional expansion slots.

Aluminium housing with lockable trays

An aluminium metal housing holds four removable trays that accept drives from 5 to 15 mm in height. Each tray locks in place and connects via SATA I/II/III. Front LEDs show power, access and fan status for at-a-glance monitoring.

Check bay clearance and drive height

Verify the chassis has a free 5.25" bay with enough depth for the rack and cable routing. Confirm your drives are 2.5" SATA models within the 5-15 mm height range; thicker drives will not fit the trays.

Highlights

  • Fits four 2.5″ drives in one 5.25″ bay
  • SATA I/II/III interface supports 6 Gbps transfer
  • Lockable removable trays secure each drive
  • Aluminium housing aids heat dissipation
  • LED indicators show power access and fan status

Specifications

BrandSYBA
ModelSY-MRA25038
Conversion Tray4 x 2.5" Drive to 5.25" Bay
Mobile Rack Drives SupportMulti 2.5" Drives to 5.25" Bay
Mobile Rack InterfaceSATA I/II/III
Protection CaseMultiple Drives
Compatible Products2.5"
FeaturesInterface Supports: SATA I/II/III (6 Gbps)
Supports 2.5” SATA drives 5-15mm in height
LED Indicators: Power, Access, Fan Status
Lockable and removable SATA trays
Aluminium metal housing
Operating Temperature: 0-55C
Shipping weight0.98 kg
Package size216 × 193 × 79 mm

Questions about this item

What SATA versions does the SY-MRA25038 mobile rack interface support, and what is the maximum data rate?

The mobile rack interface supports SATA I, II, and III with a maximum data rate of 6 Gbps.

What drive heights and bay size does the SY-MRA25038 conversion tray accommodate?

The conversion tray fits four 2.5 inch SATA drives from 5 to 15 mm in height into a single 5.25 inch drive bay.

How are the lockable trays installed in the aluminium housing, and what step is often missed?

Slide each tray into the housing until it clicks, then turn the lock to secure it; the step often missed is engaging the lock after insertion.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.