We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Purple 120 mm square frame fan with ARGB lighting and transparent blades

SXDOOL

SXDOOL ZF-12025-PURPLE 120mm case fan Purple ARGB PWM 900-2000 RPM 55.2 CFM 16.3-33.5 dB(A)

SKU CH-MTJH-6QATN

A 120 mm PWM fan with addressable RGB lighting spins at 900–2 000 RPM, delivering 55.2 CFM airflow at 16.3–33.5 dB(A) for case or radiator cooling

  • TypeCase Fan
  • ColorPurple
  • LEDARGB

Color Purple

  • PWM speed range 900-2000 RPM for quiet or max airflow
  • 2 CFM airflow cools radiators and cases effectively
  • Noise level 16.3-33.5 dB(A) stays low across speeds
  • Addressable RGB syncs with motherboard 5V 3-pin header
  • Standard 120x120x25 mm size fits coolers and cases

Purple ARGB 120 mm case fan

The SXDOOL ZF-12025-PURPLE is a 120 mm case fan finished in purple with addressable RGB lighting. It targets builders who want coordinated illumination and adjustable cooling for a standard mounting pattern. The 5 V 3-pin ARGB header connects directly to a compatible motherboard for software-controlled colour effects. This single fan suits radiators, CPU coolers or chassis intake and exhaust positions.

PWM speed range 900-2000 RPM with 55.2 CFM airflow

Pulse-width modulation lets the fan vary speed between 900 and 2000 RPM to match thermal demand. At maximum speed it delivers 55.2 CFM of airflow while acoustic output stays between 16.3 and 33.5 dB(A). The blade design is balanced for low-noise operation across the whole curve. Builders can favour silence at idle or maximum airflow under load without changing hardware.

Standard 120x120x25 mm mounting with 5 V ARGB header

The frame follows the 120x120x25 mm footprint used by most CPU coolers, water-cooling radiators and case fan mounts. Installation requires a motherboard with a 5 V 3-pin addressable RGB header and a 4-pin PWM header for speed control. No proprietary connectors or adapters are needed. The form factor leaves clearance for neighbouring components in typical builds.

Highlights

  • PWM speed range 900-2000 RPM for quiet or max airflow
  • 2 CFM airflow cools radiators and cases effectively
  • Noise level 16.3-33.5 dB(A) stays low across speeds
  • Addressable RGB syncs with motherboard 5V 3-pin header
  • Standard 120x120x25 mm size fits coolers and cases

Specifications

TypeCase Fan
ColorPurple
LEDARGB

Other versions of this model

1 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

How do I connect the 5V 3-pin ARGB header so the lighting syncs with my motherboard?

Plug the 3-pin ARGB connector into the motherboard's 5V addressable RGB header and the 4-pin PWM connector into a fan header; ensure the keyed notch aligns with the motherboard pin-1 marker to avoid reversed polarity.

What maintenance will the fan need over time?

Dust the blades and frame every few months with compressed air; the sleeve bearing is not user-serviceable, so replace the unit if noise rises above the 16.3–33.5 dB(A) range.

At what point does airflow stop increasing when the fan runs continuously?

Airflow peaks at 55.2 CFM when the PWM curve reaches 2,000 RPM; beyond that speed the fan cannot spin faster, so sustained loads see no further gain.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.