We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Square metal-frame axial fan, 150 mm, black plastic blades, two-pin connector, IP67 rating

SXDOOL

SXDOOL SXD15050B2LM 150*150*50mm AC 220-240V 38W 2400-2600RPM 195-230CFM IP67 case fan

SKU CH-PN7B-ZJ9E7

IP67-rated 150 mm metal-frame axial fan moves 195-230 CFM at 2400-2600 RPM on AC 220-240 V

  • IP67 rating protects against dust and water ingress
  • 195 to 230 CFM airflow moves large volumes of air through the chassis
  • Two ball bearing design rated for 50000 hours of continuous operation
  • AC 220 to 240 volt input connects directly to mains power without an adapter
  • 150 by 150 by 50 millimetre metal frame fits standard 150 millimetre mounting points

Built for Industrial Airflow

The SXDOOL SXD15050B2LM is a 150 mm square axial fan designed for computer cases that demand high-volume air movement. It runs directly from AC 220-240 V mains power and delivers 195-230 CFM at 2400-2600 RPM while drawing 38 W. An IP67 rating and a two-ball-bearing motor rated for 50000 hours suit continuous operation in dusty or damp environments.

Suited for Rack and Server Builds

Installers who need a single 150*150*50 mm fan with a 2-pin power lead and metal frame will find the mounting pattern and voltage match standard industrial chassis. Builders working with low-voltage PWM headers, compact ITX layouts, or noise-sensitive desktops should look elsewhere because the fan requires mains wiring, has no speed control, and moves air at a level that produces audible turbulence.

Steady Output Under Load

The two-ball-bearing design maintains consistent rotational speed during prolonged duty cycles without the wear that degrades sleeve bearings over time. Plastic blades and a rated 50000-hour lifespan mean airflow stays within the 195-230 CFM band even after months of continuous running, while the IP67 seal prevents ingress that could unbalance the rotor or corrode the windings.

Highlights

  • IP67 rating protects against dust and water ingress
  • 195 to 230 CFM airflow moves large volumes of air through the chassis
  • Two ball bearing design rated for 50000 hours of continuous operation
  • AC 220 to 240 volt input connects directly to mains power without an adapter
  • 150 by 150 by 50 millimetre metal frame fits standard 150 millimetre mounting points

Specifications

No published specifications for this item yet.

Questions about this item

Does the SXD15050B2LM need a 220-240V AC mains supply to operate?

Yes, this fan runs directly from 220-240V AC mains power and draws 38W; no separate DC power supply or motherboard header is required.

Will the 150mm square frame and 50mm depth fit the same mounting holes as my existing 150mm fans?

The unit measures 150 by 150 by 50mm, so it matches the standard 150mm square footprint; verify your case or chassis uses the same hole spacing before installing.

How can I confirm the fan is spinning at the rated 2400-2600 RPM after installation?

With no speed-sense wire on the 2-pin connector, use a handheld tachometer or visually verify steady airflow in the 195-230 CFM range to confirm correct operation.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.