We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

SXDOOL

SXDOOL SXD12038M1B 120mm case fan 120x120x38mm 12V .6A 3600 RPM dual ball bearing 3-pin

SKU CH-Z75P-N6BC0 MPN SXD12038M1B

A 120 mm dual ball bearing case fan running at 3600 RPM with a 3-pin connector for 12 V systems

  • Dual ball bearings rated for up to 50000 hours
  • 3600 RPM airflow up to 162 CFM for strong cooling
  • 3-pin connector with tachometer signal for speed monitoring
  • 120 x 120 x 38 mm fits standard 120 mm mounts
  • IP6X dustproof and water-resistant to 1 m for 30 min

Exact model and dimensions

The SXDOOL SXD12038M1B is a 120 x 120 x 38 mm DC 12V case fan rated at 0.6A and 3600 RPM ±10% with dual ball bearings. It suits builders who need a direct dimensional and electrical match for an existing 12038 housing and a 3-pin header.

Installation notes

The fan uses a 3-pin connector with all-black leads; the positive, negative and tachometer pin order has not been verified. Confirm the connector shape and pinout against the original fan before applying power; do not determine polarity by wire color.

Pre-order checks

Verify that your equipment supplies 12V DC and can deliver 0.6A at the fan header. Cross-reference the full model number SXD12038M1B and the 120 x 120 x 38 mm housing against the unit you are replacing. Note that source airflow and noise figures differ between 157 CFM at 45 dB and 162 CFM at 46.3 dB and are not independently guaranteed.

Highlights

  • Dual ball bearings rated for up to 50000 hours
  • 3600 RPM airflow up to 162 CFM for strong cooling
  • 3-pin connector with tachometer signal for speed monitoring
  • 120 x 120 x 38 mm fits standard 120 mm mounts
  • IP6X dustproof and water-resistant to 1 m for 30 min

Specifications

No published specifications for this item yet.

Questions about this item

How can I confirm the SXD12038M1B is running at the intended 3600 RPM after installation?

Check the fan speed reported by your motherboard BIOS or monitoring software; the tachometer signal on the 3-pin connector should read approximately 3600 RPM ±10% under 12V DC.

What comes in the box with the SXD12038M1B and is any mounting hardware or a PWM cable needed separately?

The package includes one 120 x 120 x 38mm fan with a 3-pin connector; mounting screws and a 4-pin PWM adapter are not included and must be sourced separately if required.

Which airflow and noise figures should I use when choosing between the listed specifications for this model?

The source data is inconsistent — 157 CFM at 45 dB and 162 CFM at 46.3 dB are both quoted — so treat them as reference values only and expect actual performance to fall within that range.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.