SXDOOL
SXDOOL SAB4B2U 120mm case fan 2700RPM 12V dual ball bearing
A 120 mm PWM case fan with dual ball bearings spins at 2700 RPM on 12 V for water-block cooling
- TypeCase Fan
- PWM control adjusts speed to thermal demand
- 2700 RPM maximum airflow for water-block cooling
- Dual ball bearing extends operational lifespan
- 12 V 0.31 A rated draw limits power load
120mm PWM fan for water-cooling loops
The SXDOOL SAB4B2U is a 120mm case fan built for radiator and water-block mounting. It runs on 12V power and uses a dual ball bearing rated for continuous high-speed operation. The 4-pin PWM connector lets the motherboard or controller adjust speed automatically.
2700RPM maximum speed with 10% tolerance
At full duty the fan spins at 2700RPM with a rated current of 0.31A and a peak of 0.45A. The 25mm thickness fits standard 120mm fan mounts. Buyers who need a lower maximum speed or a 3-pin voltage-controlled header will not be served by this model.
Highlights
- PWM control adjusts speed to thermal demand
- 2700 RPM maximum airflow for water-block cooling
- Dual ball bearing extends operational lifespan
- 12 V 0.31 A rated draw limits power load
Specifications
| Type | Case Fan |
|---|
Questions about this item
How loud will the 2700 RPM fan be inside my case?
At 2700 RPM the fan moves more air but produces noticeable noise; PWM control lets the motherboard lower speed when full cooling is not needed.
What does the 4‑pin PWM connector actually control?
The fourth pin carries a pulse‑width signal so the board can vary voltage to the 12 V motor, adjusting speed between minimum and the 2750 RPM ceiling.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



