We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small black square graphics card cooling fan with four mounting holes and a four-pin connector

SXDOOL

SXDOOL MGT4012MB-W10 4010 12V 0.09A 4-pin PWM dual-ball graphics card fan 3.9cm 2.5cm

SKU CH-7NPD-CE4ZG

Cools graphics cards with a 3.9 cm 4-pin PWM dual-ball bearing fan at 12 V

  • PWM control adjusts speed precisely via 4-pin connector
  • Dual-ball bearings extend lifespan with reduced friction
  • Low 0.09A draw minimises power consumption
  • 9cm diameter fits compact graphics card shrouds
  • 5cm hole spacing matches standard mounting patterns

Compact 40 mm PWM replacement fan

The SXDOOL MGT4012MB-W10 is a 4010 form-factor graphics card cooler that runs on 12 V at 0.09 A. It targets owners of GPUs or small-form-factor boards that use a 40 mm mounting pattern and need a direct drop-in replacement for a failed or noisy original fan.

Verify 4-pin header and 2.5 cm screw spacing

Confirm that your card supplies a 4-pin PWM header and that the mounting holes measure 2.5 cm centre-to-centre. The 3.9 cm blade diameter must clear surrounding heatsink fins or shroud plastic, and the 12 V rail must be able to deliver the rated current.

Frees the GPU from thermal throttling

The dual-ball bearing and PWM control allow the fan to spin only as fast as the GPU temperature demands, reducing acoustic load while keeping the heatsink supplied with fresh air. It draws power directly from the card, so no extra cables or external controllers are required.

Highlights

  • PWM control adjusts speed precisely via 4-pin connector
  • Dual-ball bearings extend lifespan with reduced friction
  • Low 0.09A draw minimises power consumption
  • 9cm diameter fits compact graphics card shrouds
  • 5cm hole spacing matches standard mounting patterns

Specifications

No published specifications for this item yet.

Questions about this item

What is included with the SXDOOL MGT4012MB-W10 fan and do I need any extra cables or brackets?

The package contains one 4010 12 V 0.09 A 4-pin PWM dual-ball fan; mounting screws and any adapter cables are not included and must be sourced separately.

Which version of this 40 mm graphics card fan should I choose for my card?

Select the MGT4012MB-W10 HF model with 3.9 cm diameter and 2.5 cm hole spacing to match the original cooler mounting pattern.

What does the 0.09 A current rating mean when the fan is installed on a graphics card?

At 12 V the fan draws 0.09 A, so it can be powered directly from a standard 4-pin PWM header on the graphics card without an external power connection.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.