We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Square 60mm black frame fan with red and black bare wires

SXDOOL

SXDOOL MB60201V1-000C-A99 12V 60x60x20mm 4500 RPM 23 CFM Vapo Bearing Case Fan

SKU CH-RANC-SGS79

Compact 12V DC axial fan with 60x60x20mm frame, 4500 RPM, 23 CFM airflow and Vapo bearing for equipment cooling

  • TypeCase Fan
  • 12V DC fan draws 0.135A for low power cooling
  • 4500 RPM delivers 23.0 CFM maximum airflow
  • Vapo bearing with MagLev system reduces friction and noise
  • 5 dB(A) keeps operation quiet in equipment
  • 60x60x20mm frame with bare leads fits tight spaces

Exact SUNON MB60201V1-000C-A99 replacement fan

This 60 x 60 x 20mm DC axial fan is built for equipment-cooling assemblies such as humidifiers, test instruments and control modules that require the complete MB60201V1-000C-A99 model. It runs on 12V DC at 0.135A and 1.62W, delivering 23.0 CFM airflow at 4500 RPM with 0.18 inH2O static pressure and 33.5 dB(A) noise. The MagLev Vapo bearing and A99 automatic-restart function are integral to the design.

Upgrades from worn or mismatched 60mm fans

The jump is worth it when the original MB60201V1-000C-A99 label is legible and the replacement must match frame dimensions, mounting-hole pattern, voltage, current, wire count and bare-lead termination exactly. Do not select by appearance alone; a different model code, connector type or bearing system will not fit the same assembly. This fan is not for builders who need a PWM connector, a higher airflow rating or a different frame thickness.

Simple two-wire installation with power off

Disconnect power, match the red and black bare leads to the equipment's supply, and secure the fan using the existing mounting holes. The bare leads have no plug, so polarity must be observed and connections insulated. What usually goes wrong is ordering without verifying the full model label, the mounting-hole pattern, the 12V 0.135A rating and the bare-lead termination against the original unit.

Highlights

  • 12V DC fan draws 0.135A for low power cooling
  • 4500 RPM delivers 23.0 CFM maximum airflow
  • Vapo bearing with MagLev system reduces friction and noise
  • 5 dB(A) keeps operation quiet in equipment
  • 60x60x20mm frame with bare leads fits tight spaces

Specifications

TypeCase Fan

Questions about this item

What are the mounting-hole dimensions for the 60x60x20mm frame?

The fan uses a standard 60mm square frame with 20mm thickness; verify the original unit's hole pattern matches before ordering.

How do I connect the bare red and black leads to a 12V DC source?

Strip insulation, match red to positive and black to negative, then solder or use crimp connectors; disconnect power before wiring.

When should the Vapo bearing fan be replaced?

Replace if RPM drops below 4500, airflow falls under 23 CFM, or noise exceeds 33.5 dB(A); the MagLev Vapo bearing is rated for long life.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.