SXDOOL
SXDOOL KZ5387 6-pin to dual 6+2-pin power splitter cord 5pcs 20cm 18AWG
Five 20 cm 18 AWG cables split one 6-pin PCIe connector into two 6+2-pin plugs for graphics-card power
- TypeCase Fan Accessory
- Five cables split one 6-pin into two 6+2-pin connectors
- 20 cm length keeps cable runs tidy inside the case
- 18 AWG copper wire handles up to 300 W per cable
- Each 6+2-pin plug fits both 6-pin and 8-pin graphics card sockets
- Pack of five supports multi-GPU or mining rig builds
Five cables in one pack
This set contains five splitter cords that convert a single 6-pin PCIe output into two 6+2-pin connectors. Builders running multiple graphics cards or mining rigs can power two devices from one rail without extra PSU cables. Each cord is 20 cm long and uses 18 AWG copper wire.
300 W limit per 6-pin source
The supplier warns that pushing more than 300 W through a single 6-pin 18 AWG cable creates a fire hazard. Check the total draw of both attached devices before connecting them to the same PSU lead. Staying under this ceiling keeps the wiring within its rated capacity.
Fits tight GPU spacing
The short 20 cm length reduces clutter inside compact cases and mining frames. Female 6-pin plugs into the PSU; dual male 6+2-pin ends mate with 6-pin or 8-pin GPU sockets. No extra adapters are required, freeing PSU ports for other components.
Highlights
- Five cables split one 6-pin into two 6+2-pin connectors
- 20 cm length keeps cable runs tidy inside the case
- 18 AWG copper wire handles up to 300 W per cable
- Each 6+2-pin plug fits both 6-pin and 8-pin graphics card sockets
- Pack of five supports multi-GPU or mining rig builds
Specifications
| Type | Case Fan Accessory |
|---|
Questions about this item
How much power can each 6-pin to dual 6+2-pin cable safely deliver to a graphics card?
Each cable uses 18AWG wire and the supplier warns not to exceed 300W on a single 6-pin source to avoid a fire hazard.
What connectors does the KZ5387 splitter use and which PCIe power sockets do they fit?
One 6-pin PCIe female plugs into the PSU; two 6+2-pin PCIe males fit either 6-pin or 8-pin graphics card sockets.
Will the 20cm length reach from a bottom-mounted PSU to a top-mounted GPU in a mid-tower case?
At 20cm the cable is short; it suits mining rigs or tight builds but may not span a full-height mid-tower.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



