We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Square 80mm case fan with blue LED lighting and black frame

SXDOOL

SXDOOL F128025DL 80mm Blue LED Case Fan 12V 0.10A 2000 RPM

SKU CH-3DW4-RCNN4 MPN F128025DL

An 80 mm case fan with blue LED lighting, 12 V power, 0.10 A draw, 2000 RPM speed and 7.3 cm screw spacing for standard mounts

  • TypeCase Fan
  • ColorBlue
  • LEDBlue
  • Blue LED glow adds visible style inside the case
  • 2000 RPM airflow moves heat away from components
  • 12 V 0.10 A draw keeps power use low
  • 3 cm screw spacing matches standard 80 mm mounts
  • 25 cm cable reaches motherboard 3-pin header easily

80 mm Blue LED case fan

The SXDOOL F128025DL is an 80 mm case fan with a blue LED and ball bearing. It runs at 12 V and draws 0.10 A from a standard motherboard three-pin header. The frame measures 94 mm across and the blade spans 85 mm. A 25 cm lead connects the fan to the header.

Replaces standard 80 mm square fans

The screw-hole spacing is 7.3 cm, matching ordinary 80 mm square frames for a direct swap. The five-sided intake design pulls air from multiple directions, improving flow over flat-intake models. The upgrade is worthwhile when an older sleeve-bearing fan becomes noisy or the LED has failed. Builders needing higher static pressure for dense radiators should look elsewhere.

Fits tight 80 mm mounts with three-pin power

The 25 cm cable reaches nearby headers on ITX or micro-ATX boards without extensions. Blue illumination adds a subtle accent in windowed cases. The fan frees up a four-pin PWM header for CPU coolers that require speed control. Cases without any 80 mm mounting points cannot use this fan.

Highlights

  • Blue LED glow adds visible style inside the case
  • 2000 RPM airflow moves heat away from components
  • 12 V 0.10 A draw keeps power use low
  • 3 cm screw spacing matches standard 80 mm mounts
  • 25 cm cable reaches motherboard 3-pin header easily

Specifications

TypeCase Fan
ColorBlue
LEDBlue

Questions about this item

Will the 7.3 cm screw-hole spacing fit my standard 80 mm fan mount?

Yes, the 7.3 cm hole distance matches the standard 80 mm square fan pattern so it drops into the same four mounting points.

Does the 3-pin motherboard connector allow speed control or only fixed 2000 rpm operation?

The 3-pin plug gives the motherboard tachometer feedback; voltage regulation from the board or a fan controller can lower the speed below 2000 rpm.

How often should I clean the five-side intake frame to keep airflow steady?

Dust the frame and blades every few months with compressed air; the ball bearing is sealed and does not need lubrication.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.