We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black square 80mm case fan with 4-pin connector and 59cm cable

SXDOOL

SXDOOL AVC DS08025T2UB P224 80mm 25mm 12V 0.70A 4Pin case fan

SKU CH-K0ZT-Z7A4W

Genuine AVC 80 mm PWM case fan with single-ball bearing, 64 CFM airflow and 60 000-hour rated life

  • 4-pin PWM control enables precise speed regulation from 800 to 4600 RPM
  • Single ball bearing rated for 60000 hours of continuous operation
  • 80 mm square frame with 25 mm depth fits standard case mounts
  • 64 CFM airflow at 12 V and 0.70 A for effective component cooling
  • 59 cm lead provides flexible routing inside the chassis

80 mm 4-pin case fan for Lenovo OEM replacement

This 80 mm by 25 mm fan uses a single ball bearing and a four-wire PWM connection to the main board. It is built as a genuine AVC component supplied to Lenovo and suits chassis or CPU cooler mounts that accept an 8025 form factor. The unit runs on 12 V at 0.70 A and delivers a reference airflow of 64 CFM.

Check mounting holes and header before ordering

Verify that your case or heatsink has the 80 mm square mounting pattern and that the motherboard provides a standard 4-pin PWM header. The lead length is 59 cm, so confirm the cable can reach the header without strain. The fan speed ranges from 800 to 4600 RPM with a five percent tolerance, so ensure your fan curve can accommodate that window.

Bulk packaging means no extra screws or software

The fan ships in bulk without mounting screws, adapters or bundled utilities. You will need to supply your own fixings and configure speed profiles in the system BIOS or fan-control software. The rated service life is 60000 hours under normal operating conditions.

Highlights

  • 4-pin PWM control enables precise speed regulation from 800 to 4600 RPM
  • Single ball bearing rated for 60000 hours of continuous operation
  • 80 mm square frame with 25 mm depth fits standard case mounts
  • 64 CFM airflow at 12 V and 0.70 A for effective component cooling
  • 59 cm lead provides flexible routing inside the chassis

Specifications

No published specifications for this item yet.

Questions about this item

What comes with the DS08025T2UB P224 and do I need any extra cables or mounts?

The fan ships as a single unit with a 59 cm lead ending in a standard 4-pin motherboard connector. Mounting screws are not included, so reuse the original hardware or buy a set separately.

How do I decide between the 800 RPM floor and the 4600 RPM ceiling for this 80 mm fan?

The 4-pin PWM interface lets the motherboard vary speed automatically between 800 and 4600 RPM. Choose a fan curve that keeps noise low at idle and ramps up only when the CPU or chassis temperature rises.

What does the 64 CFM airflow rating mean once the fan is installed in a case?

At 4600 RPM the fan moves roughly 64 CFM through an unrestricted 80 mm opening. In a real case with filters and grilles the delivered airflow will be lower, but the rating shows the peak cooling capacity available.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.