SXDOOL
SXDOOL AFB0612EHD 60×60×20 mm 12 V 0.47 A 6600 RPM 35.21 CFM double ball case fan
A 60 mm dual-ball-bearing case fan spins at 6600 RPM to deliver 35.21 CFM from a 12 V 0.47 A PWM header
- TypeCase Fan
- High airflow for compact builds with 35.21 CFM at 6600 RPM
- Double ball bearing extends service life under continuous 12 V operation
- PWM speed regulation matches cooling to real-time thermal demand
- 60 × 60 × 20 mm frame fits tight 6020 mounting positions
- Tachometer feedback enables precise fan-curve control via motherboard
60 mm PWM case fan for tight builds
The SXDOOL AFB0612EHD is a 60×60×20 mm DC12 V fan drawing 0.47 A and spinning at 6600 RPM to deliver 35.21 CFM. Its four-pin connector enables motherboard PWM speed regulation and tachometer feedback for automatic control.
Double-ball bearing sustains high speed under load
Double ball bearings reduce friction at 6600 RPM, keeping airflow steady during prolonged thermal loads. PWM regulation lets the motherboard lower speed when temperatures drop, cutting noise without sacrificing peak cooling capacity when the system is stressed.
Replaces sleeve-bearing 60 mm fans in dense chassis
The unit upgrades older 60 mm fans that use sleeve bearings and lack PWM control, eliminating bearing wear and adding automatic speed management. The improvement matters most in compact enclosures where a single 60 mm slot must move 35.21 CFM reliably over years of continuous operation.
Highlights
- High airflow for compact builds with 35.21 CFM at 6600 RPM
- Double ball bearing extends service life under continuous 12 V operation
- PWM speed regulation matches cooling to real-time thermal demand
- 60 × 60 × 20 mm frame fits tight 6020 mounting positions
- Tachometer feedback enables precise fan-curve control via motherboard
Specifications
| Type | Case Fan |
|---|
Questions about this item
How loud is the AFB0612EHD when it runs at its full 6600 RPM all day?
At 6600 RPM the fan moves 35.21 CFM; double-ball bearings keep mechanical noise steady during continuous operation.
What connector does the AFB0612EHD need on my motherboard or controller?
The fan uses a 4-pin PWM connector for 12 V power and motherboard speed control.
Will the 60×60×20 mm AFB0612EHD fit the mounting holes on my older 60 mm case or heatsink?
Yes — the 60 mm square frame and 20 mm thickness match the standard 60 mm mounting pattern used on older hardware.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



