We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 60mm square case fan with hydro bearing and three-pin connector

SXDOOL

SXDOOL ADDA AD0612LX-H93 60mm 12V 0.13A Hydro Bearing 3 Pin case fan

SKU CH-WX9Y-5RS17

60 mm hydro-bearing case fan running at 4000–4499 RPM on 12 V 0.13 A with a three-pin connector

  • Fan Size60mm
  • Bearing TypeHydro Bearing
  • RPM4000-4499 RPM
  • Power Connector3 Pin
  • ColorBlack
  • LEDNon-LED
  • Compact 60 mm frame fits tight projector chassis
  • Hydro bearing runs quietly at 4000-4499 RPM
  • 12 V, 0.13 A draw keeps power use low
  • Three-wire original plug connects directly to BenQ MS614/MH680/W1070
  • Non-LED black finish suits professional environments

ADDA AD0612LX-H93 60 mm 12 V case fan

This ADDA AD0612LX-H93 is a 60 mm square frame fan with a 13 mm thickness. It runs on 12 V DC at 0.13 A and uses a hydro bearing. The three-wire original plug connects to a standard 3-pin motherboard header. It is intended as a replacement cooler for compact equipment such as the BenQ MS614 projector.

Who this suits and who it does not

Technicians servicing a BenQ MS614 or MH 680 W 1070 projector, or any device that takes a 60x60x13 mm 12 V 3-pin fan, can use this as a direct drop-in. Builders who need PWM speed control, larger mounting holes, or RGB illumination should look at other models.

Deciding specification

The 60x60x13 mm frame with a three-wire 12 V plug is the single specification that determines fit. Verify that your device accepts those exact dimensions and connector before ordering.

Highlights

  • Compact 60 mm frame fits tight projector chassis
  • Hydro bearing runs quietly at 4000-4499 RPM
  • 12 V, 0.13 A draw keeps power use low
  • Three-wire original plug connects directly to BenQ MS614/MH680/W1070
  • Non-LED black finish suits professional environments

Specifications

Fan Size60mm
Bearing TypeHydro Bearing
RPM4000-4499 RPM
Power Connector3 Pin
ColorBlack
LEDNon-LED

Questions about this item

Does my motherboard need a 3-pin fan header to run this 60 mm ADDA fan?

Yes, the fan uses a three-wire original plug that fits a standard 3-pin motherboard header and draws 12 V at 0.13 A.

Can I keep using an older 3-pin header that only runs at fixed voltage?

The fan will spin between 4000 and 4499 RPM on a fixed 12 V header; speed control requires a header that supports voltage regulation.

How can I confirm the fan is operating correctly after installation?

Check the BIOS or monitoring software for a stable RPM reading in the 4000–4499 range and feel steady airflow from the 60×60×13 mm frame.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.