SXDOOL
SXDOOL A8025-18CB-5BN-L1Dimensions 80x80x25mm 12V 0.21A 1800 RPM 22.84 CFM case fan
An 80 mm case fan delivering 22.84 CFM at 1800 RPM with a 22 dBA noise level
- Fan Size250mm
- Air Flow20-25 CFM
- Quiet 22 dBA operation for low-noise builds
- 84 CFM airflow cools compact cases effectively
- 1800 RPM speed with speed-sensor feedback
- Sleeve bearing rated for 30000 hours life
- 12 V 0.21 A draws only 2.52 W power
SXDOOL 80 mm 12 V case fan
The SXDOOL A8025-18CB-5BN-L1Dimensions is an 80 x 80 x 25 mm case fan that runs on 12 V DC and draws 0.21 A. It spins at 1800 RPM and pushes 22.84 CFM of air at a rated 22 dBA noise level. A sleeve bearing provides a 30000-hour life rating and a three-pin connector supports speed sensing. The lead length is 30 mm.
Suited for tight 80 mm mounts needing quiet airflow
This fan fits builds that require an 80 mm frame and low acoustic output. The modest 1.78 mmH₂O static pressure makes it a poor match for dense radiators or restrictive filters. Buyers who need higher static pressure or PWM control should look at alternative models.
1800 RPM sleeve-bearing fan with 30 mm lead
The 1800 RPM speed and sleeve bearing define the airflow-to-noise balance for this unit. The fixed three-pin interface and short 30 mm cable length are the key constraints when planning cable routing. Verify that your motherboard header and chassis layout can accommodate these specifications.
Highlights
- Quiet 22 dBA operation for low-noise builds
- 84 CFM airflow cools compact cases effectively
- 1800 RPM speed with speed-sensor feedback
- Sleeve bearing rated for 30000 hours life
- 12 V 0.21 A draws only 2.52 W power
Specifications
| Brand | BINYEAE |
|---|---|
| Fan Size | 250mm |
| Air Flow | 20-25 CFM |
Questions about this item
Should I pick the 80 mm or 250 mm version for my build?
The model name and detailed specs describe an 80 mm frame; the 250 mm figure appears only in a summary line and does not match the 80x80x25 mm dimensions.
What does the 22.84 CFM airflow deliver in a real chassis?
At 1800 RPM the fan moves 22.84 CFM with 1.78 mmH₂O static pressure, enough for moderate case ventilation while keeping noise near 22 dBA.
How does the 3-pin connector limit speed control?
The 3-pin header supports RPM monitoring but lacks PWM, so voltage regulation is the only way to vary the 1800 RPM maximum speed.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



