We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Square black 140mm case fan with blue LED ring

SXDOOL

SXDOOL A14025-10CB-3BN-F1 140mm case fan 12V 1000RPM

SKU CH-K6X3-8X0HG MPN A14025-10CB-3BN-F1

A 140 mm case fan with blue LED lighting runs at 1000 RPM on 12 V and includes an independent LED control switch

  • 140 mm frame fits larger radiator mounts
  • 12 V 0.14 A draw keeps power use low
  • 1000 RPM top speed delivers steady airflow
  • Blue LED with independent switch adds visible style
  • 25 mm thickness suits standard case slots

140 mm fan with blue LED and switch

This 140 mm case fan runs at 1000 RPM on 12 V and draws 0.14 A. Blue LEDs illuminate the frame and an independent switch turns the lighting on or off without stopping the motor. The frame measures 140 by 140 by 25 mm and fits standard 140 mm mounting points.

Who this suits and who it does not

Builders who want a single 140 mm fan with switchable blue lighting for a case or radiator will find this a direct fit. Systems that require variable-speed control, PWM signalling or higher static pressure should look at a different model.

The specification that decides fit

The fixed 1000 RPM speed at 12 V is the deciding figure; if your build needs adjustable fan curves or a different airflow target, this unit will not meet that requirement.

Highlights

  • 140 mm frame fits larger radiator mounts
  • 12 V 0.14 A draw keeps power use low
  • 1000 RPM top speed delivers steady airflow
  • Blue LED with independent switch adds visible style
  • 25 mm thickness suits standard case slots

Specifications

No published specifications for this item yet.

Questions about this item

Will the 140mm frame and 12V 0.14A draw fit my older case fan headers?

The 140*140*25mm dimensions match standard 140mm mounts and the 12V 0.14A rating stays within typical header limits.

How can I confirm the fan runs at its rated 1000RPM after installation?

Check the RPM reading in BIOS or monitoring software; it should report around 1000RPM when the header supplies 12V.

Does the box include mounting screws or a PWM adapter for 4-pin headers?

The fan ships as the bare unit; mounting screws and any 3-pin to 4-pin adapters must be purchased separately.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.