We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small square frameless graphics card fan with two wires and mounting holes

SXDOOL

SXDOOL 47mm FY04510M12SAA 12V 0.12A ATI 9600 X1300 X700 graphics fan accessory

SKU CH-5ZWS-DVJAV

47 mm frameless VGA cooler with 39 mm mounting holes for ATI 9600, X1300 and X700 cards

  • 47 mm diameter fits tight graphics-card spaces
  • 39 mm hole spacing matches ATI 9600 X1300 X700 coolers
  • 12 V 0.12 A draws minimal power from the card
  • Two-wire two-pin connector enables direct replacement
  • Frameless design reduces weight and vibration

Replacement fan for ATI graphics cards

This 47 mm frameless VGA fan fits ATI 9600, X1300 and X700 graphics cards. It runs on 12 V at 0.12 A through a two-wire, two-pin connector. The unit matches the FY04510M12SAA and A4010-45LB-2UN-C1 specifications. It is sold new as a direct cooler accessory.

Mounting constraint: 39 mm hole spacing

The fan requires a 39 mm centre-to-centre mounting pattern. If the graphics card heatsink uses a different pitch the fan cannot be secured. The 47 mm diameter and frameless design leave no room for adapter brackets. Verify the exact hole distance before purchase.

Cooling headroom for legacy GPUs

The low 0.12 A draw suits the modest thermal output of the listed ATI models. It provides adequate airflow for stock-speed operation of those cards. Overclocked or higher-wattage GPUs will exceed the fan’s capacity. Buyers needing greater static pressure or larger airflow must choose a different cooler.

Highlights

  • 47 mm diameter fits tight graphics-card spaces
  • 39 mm hole spacing matches ATI 9600 X1300 X700 coolers
  • 12 V 0.12 A draws minimal power from the card
  • Two-wire two-pin connector enables direct replacement
  • Frameless design reduces weight and vibration

Specifications

No published specifications for this item yet.

Questions about this item

Which FY04510M12SAA version matches my ATI card?

This fan fits ATI 9600, X1300 and X700 graphics cards with a 47 mm diameter and 39 mm hole spacing.

What does the 12 V 0.12 A rating mean once installed?

It draws 0.12 amps from the graphics card's 12 volt fan header, giving the airflow the original cooler was designed for.

What connector standard does the 2-wire 2-pin plug follow?

It uses a standard 2-pin 12 V fan connector that plugs directly onto the graphics card's fan header without adapters.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.