We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Square 31mm red LED cooling fan with black frame and transparent blades

SXDOOL

SXDOOL 3010 12V Red LED Cooling Fan 31mm 11000RPM

SKU CH-AVGK-8N85P

A 31 mm square 12 V red LED fan with hydraulic bearing spins at 11000 RPM for compact cooling across automotive, industrial and household electronics

  • Red LED glow for easy status checks
  • Hydraulic bearing runs quietly at 11000RPM
  • Low 0.06A draw fits 9V–12V systems
  • Compact 31mm square with 19mm mounting holes
  • Two-wire design simplifies multi-platform installs

Compact 3010 Fan for 12 V Systems

The SXDOOL 3010 is a 31 mm square cooling fan that runs on 9 V to 12 V and spins at 11000 RPM. A hydraulic bearing and two-wire design keep the assembly simple for tight electronic enclosures. Red LEDs light the blade area when power is applied. The 19 mm mounting-hole spacing matches the standard 3010 footprint.

Suitable for Low-Current 12 V Cooling

Builders who need a small 12 V fan with a 0.06 A draw for automotive, medical, industrial or household gear will find this unit fits. Buyers who require PWM speed control, a tachometer signal or a larger frame size should look at other models. The fixed two-wire connection does not support variable-speed headers.

31 mm Frame with 19 mm Hole Spacing

The 31 mm by 31 mm by 12 mm body and 19 mm screw centres decide whether this fan fits the target chassis. Verify those dimensions against your mounting pattern before ordering. No other specification overrides this physical constraint.

Highlights

  • Red LED glow for easy status checks
  • Hydraulic bearing runs quietly at 11000RPM
  • Low 0.06A draw fits 9V–12V systems
  • Compact 31mm square with 19mm mounting holes
  • Two-wire design simplifies multi-platform installs

Specifications

No published specifications for this item yet.

Questions about this item

What mounting hole spacing does the 3010 fan need?

The fan uses a 19 mm hole distance between the four corner mounting holes.

How do I connect the two wires to a 12 V supply?

Connect the red wire to positive and the black wire to negative; the fan runs at 9–12 V and draws 0.06 A.

When should I plan to replace the hydraulic bearing?

Hydraulic bearings typically last several years of continuous use; replace the fan if noise increases or speed drops below 11000 RPM.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.