SXDOOL
SXDOOL 2406KL-05W-B30 60mm 24V 0.08A 4600 RPM 34 dBA 2-pin case fan
A 60 mm dual-ball-bearing case fan running at 4600 RPM and 34 dBA on a 24 V two-pin connector
- TypeCase Fan
- Fan Size60mm
- Bearing Type2 Ball
- RPM4500-4999 RPM
- Noise Level30 - 35 dBA
- Power Connector2 Pin
- Compact 60 mm frame fits tight server chassis
- Dual-ball bearing runs at 4600 RPM for steady airflow
- Low 34 dBA noise keeps racks quiet
- 24 V 0.08 A draw uses only 3.12 W
- Simple 2-pin power connector for quick install
60 mm 24 V case fan
The SXDOOL 2406KL-05W-B30 is a 60 mm square frame fan 15 mm thick designed for 24 V DC systems. It draws 0.08 A and spins at 4600 RPM with a noise rating of 34 dBA. The two-ball bearing and 2-pin power connector suit continuous operation in servers or industrial enclosures.
Who this suits and who should look elsewhere
This fan fits builders who need a 60 mm 24 V unit with a standard two-pin header and moderate airflow. It is not for buyers who want PWM speed control or a three-pin or four-pin connector. It is also not for anyone needing a 12 V or 5 V model or a larger frame size.
Installation ease and common pitfalls
The 2-pin plug connects directly to a matching header; polarity must be observed because the fan has no built-in protection. The 60 mm mounting holes align with common 6015 patterns, but the 15 mm thickness can interfere with very tight clearance brackets. No screws are included, so supply your own M3 hardware.
Highlights
- Compact 60 mm frame fits tight server chassis
- Dual-ball bearing runs at 4600 RPM for steady airflow
- Low 34 dBA noise keeps racks quiet
- 24 V 0.08 A draw uses only 3.12 W
- Simple 2-pin power connector for quick install
Specifications
| Type | Case Fan |
|---|---|
| Fan Size | 60mm |
| Bearing Type | 2 Ball |
| RPM | 4500-4999 RPM |
| Noise Level | 30 - 35 dBA |
| Power Connector | 2 Pin |
| Color | Black |
| LED | Non-LED |
Questions about this item
Does my chassis have a 60 mm mounting grid with 15 mm depth clearance for this fan?
The fan measures 60×60×15 mm, so it fits any standard 60 mm square cut-out that allows 15 mm thickness.
Will the 2-pin connector run at full 4600 RPM on a motherboard header that only supplies 12 V?
The motor is rated for 24 V and 0.08 A; at 12 V it will spin slower and may not reach the specified 4600 RPM or 34 dBA level.
How can I confirm the fan is delivering its rated 34 dBA and 4600 RPM after installation?
Measure the acoustic output at one metre with a calibrated meter and read the RPM via BIOS or monitoring software; both should match 34 dBA and 4600 RPM.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00114286BTC
In stock
