Supermicro
Supermicro SYS-6048R-E1CR36N 4U rack server 36x 3.5" 2x E5-2690 v4 32GB DDR4
A 4U rack server holding 36 hot-swap 3.5" drives, dual 14-core Xeon E5-2690 v4 CPUs at 2.6 GHz, 32 GB DDR4, MegaRAID 9361-8i controller, quad 10GBase-T LAN and IPMI 2.0
- Rack Height1U
- Redundant Hot-swap PowerYes
- CPU TypeIntel Xeon
- CPU Speed2.60 GHz
- CPU SocketLGA 2011-3
- Number of CPU Cores14-Core Processor
- Dual 14-core Xeon processors at 2.6 GHz deliver high parallel throughput
- 32 GB DDR4 ECC memory provides error-corrected capacity for critical workloads
- 36 hot-swap 3.5-inch drive bays enable massive direct-attached storage density
- MegaRAID 9361-8i controller supports RAID 0, 1, 5, 6, 10, 50, 60 for flexible data protection
- Quad 10GBase-T ports with X540 controller give high-speed network connectivity
36-bay 4U rack server
The Supermicro SYS-6048R-E1CR36N is a 4U rackmount server designed for high-density storage workloads. It ships with dual Intel Xeon E5-2690 v4 processors, each offering 14 cores at 2.6 GHz, and 32 GB of DDR4 ECC memory. The platform targets enterprises needing massive capacity in a single chassis.
Verify rack depth and power feeds
Confirm your rack can accommodate the 847-series chassis depth and that two 1280 W platinum power supplies can be fed from separate circuits. The system includes 36 hot-swap 3.5-inch trays for SATA or SAS drives but no drives are installed. Front bezel and rack rails are not included.
Sustained throughput with hardware RAID
Under continuous load the LSI MegaRAID 9361-8i controller maintains performance across RAID 0, 1, 5, 6, 10, 50 and 60 using its 1 GB battery-backed cache. Quad 10GBase-T ports from the Intel X540 controller sustain high network throughput while IPMI 2.0 provides remote KVM and virtual media access.
Highlights
- Dual 14-core Xeon processors at 2.6 GHz deliver high parallel throughput
- 32 GB DDR4 ECC memory provides error-corrected capacity for critical workloads
- 36 hot-swap 3.5-inch drive bays enable massive direct-attached storage density
- MegaRAID 9361-8i controller supports RAID 0, 1, 5, 6, 10, 50, 60 for flexible data protection
- Quad 10GBase-T ports with X540 controller give high-speed network connectivity
Specifications
| Brand | SUPERMICRO |
|---|---|
| Series | CSE-847BE1C-R1K28LPB-X10DRi-T4+ |
| Model | SYS-6048R-E1CR36N |
| Rack Height | 1U |
| Redundant Hot-swap Power | Yes |
| CPU Type | Intel Xeon |
| CPU Speed | 2.60 GHz |
| CPU Socket | LGA 2011-3 |
| Number of CPU Cores | 14-Core Processor |
| # of Processors Installed | E5-2690 V4 |
| Installed Memory Size | 32GB |
| Storage Controller | LSI MegaRAID 9361-8i Controller |
| HDD Interface | SATA/SAS |
| SSD (Installed) | No |
| Raid Level | RAID 0/1/5/6/10/50/60 |
| GPU Type | Matrox G200 |
| Video Memory | 8MB |
| Ethernet Controller | 4x 10GBase-T LAN with Intel X540 Ethernet Controller |
| Management Port | RJ 45 |
| Features | 36 x 3.5" SATA/SAS Hot-Plug Drive Bays |
Questions about this item
Does the server ship with hard drives, and are rack rails included?
The unit includes 36 hot-swap 3.5-inch SAS/SATA drive trays but no hard drives. Front bezel and rack mount rails are not included and must be purchased separately.
Which processor and memory configuration is installed in this model?
Two Intel Xeon E5-2690 v4 14-core processors running at 2.6 GHz and 32 GB of DDR4 2400 MHz registered ECC memory (4x 8 GB) are pre-installed.
What RAID levels and drive count does the 9361-8i controller support in this chassis?
The MegaRAID 9361-8i provides 8 internal SAS 12 Gb/s ports with 1 GB cache and battery backup, supporting RAID 0, 1, 5, 6, 10, 50 and 60 across the 36 drive bays.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
DELL J1-7490AA01 All-in-One PC Core i7-10700 2.9GHz 16GB 512GB SSD 23.8" FHD
- All-in-One PC
- All-in-One
HP J1-800G6AA01 All-in-One PC Core i5-10500 16GB DDR4 512GB NVMe 23.8
- All-in-One PC
- All-in-One



