Supermicro
Supermicro SYS-6048R-E1CR36N 36-bay 4U rack server 2x Xeon E5-2683 v4 2.1GHz 16-core 256GB DDR4
36 hot-swap 3.5" SAS/SATA bays, dual Xeon E5-2683 v4 16-core CPUs, 256GB DDR4 ECC, MegaRAID 9361-8i, quad 10GBase-T LAN, IPMI 2.0, dual 1280W PSUs
- Rack Height1U
- Redundant Hot-swap PowerYes
- CPU TypeIntel Xeon
- CPU Speed2.10 GHz
- CPU SocketLGA 2011-3
- Number of CPU Cores16-Core Processor
- Dual 16-core Xeon E5-2683 v4 CPUs at 2.1 GHz base with 3.0 GHz Turbo
- 256 GB DDR4 2400 MHz registered ECC memory across 8 modules
- 36 hot-swap 3.5-inch SAS/SATA drive bays for massive storage density
- MegaRAID 9361-8i controller with 1 GB cache and battery backup supports RAID 0/1/5/6/10/50/60
- Quad 10GBase-T LAN via Intel X540 plus IPMI 2.0 dedicated management port
Dense 36-bay storage server
The Supermicro SYS-6048R-E1CR36N is a 4U rackmount system built for high-capacity storage workloads. Dual Intel Xeon E5-2683 v4 processors deliver 16 cores each at 2.1 GHz with 3.0 GHz turbo. 256 GB of DDR4 registered ECC memory and an LSI MegaRAID 9361-8i controller with 1 GB cache support RAID 0, 1, 5, 6, 10, 50 and 60 across 36 hot-swap 3.5-inch bays.
Suits archive and throughput workloads
This server fits teams that need massive drive density and hardware RAID in a single 4U chassis. Quad 10GBase-T ports and IPMI 2.0 with dedicated management LAN simplify network integration and remote administration. Redundant 1280 W 80 Plus Platinum power supplies maintain uptime during component failure. Buyers who need more than 36 drive bays, GPU acceleration or a smaller rack footprint should evaluate other platforms.
36 hot-swap 3.5-inch drive bays
The defining specification is the 36-bay capacity split between front and rear trays, all supporting SAS3 and SATA3 drives without installed media. This density decides whether the chassis matches the storage scale you are planning.
Highlights
- Dual 16-core Xeon E5-2683 v4 CPUs at 2.1 GHz base with 3.0 GHz Turbo
- 256 GB DDR4 2400 MHz registered ECC memory across 8 modules
- 36 hot-swap 3.5-inch SAS/SATA drive bays for massive storage density
- MegaRAID 9361-8i controller with 1 GB cache and battery backup supports RAID 0/1/5/6/10/50/60
- Quad 10GBase-T LAN via Intel X540 plus IPMI 2.0 dedicated management port
Specifications
| Brand | SUPERMICRO |
|---|---|
| Series | CSE-847BE1C-R1K28LPB-X10DRi-T4+ |
| Model | SYS-6048R-E1CR36N |
| Rack Height | 1U |
| Redundant Hot-swap Power | Yes |
| CPU Type | Intel Xeon |
| CPU Speed | 2.10 GHz |
| CPU Socket | LGA 2011-3 |
| Number of CPU Cores | 16-Core Processor |
| # of Processors Installed | E5-2683 V4 |
| Installed Memory Size | 256GB |
| Storage Controller | LSI MegaRAID 9361-8i Controller |
| HDD Interface | SATA/SAS |
| SSD (Installed) | No |
| Raid Level | RAID 0/1/5/6/10/50/60 |
| GPU Type | Matrox G200 |
| Video Memory | 8MB |
| Ethernet Controller | 4x 10GBase-T LAN with Intel X540 Ethernet Controller |
| Management Port | RJ 45 |
| Features | 36 x 3.5" SATA/SAS Hot-Plug Drive Bays |
Questions about this item
What rack height and rail kit do I need to mount this 4U server?
The chassis is 4U tall; front bezel and rack-mount rails are not included, so you must supply rails rated for a 4U enclosure.
Can the LSI MegaRAID 9361-8i controller manage all 36 drive bays at once?
The 9361-8i provides eight SAS 12 Gb/s ports; the remaining bays connect through the backplane expander, so the single controller manages the full 36-bay set.
How do I confirm the IPMI 2.0 interface is reachable after power-on?
Connect the dedicated RJ45 IPMI port, then browse to the BMC address shown on the front LCD or your DHCP server to verify KVM-over-LAN and virtual media access.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
DELL J1-7490AA01 All-in-One PC Core i7-10700 2.9GHz 16GB 512GB SSD 23.8" FHD
- All-in-One PC
- All-in-One
HP J1-800G6AA01 All-in-One PC Core i5-10500 16GB DDR4 512GB NVMe 23.8
- All-in-One PC
- All-in-One



