Supermicro
Supermicro SYS-6028U-TR4T+ 2U rack server 2x Xeon E5-2683 v4 2.1GHz 16-core 768GB DDR4 12x 3.5" bays
2U rack server with dual 16-core Xeon processors at 2.1GHz, 768GB DDR4 ECC memory, 12 hot-swap 3.5" drive bays, MegaRAID 9361-8i controller, quad 10GBase-T ports, IPMI 2.0.
- Rack Height1U
- Redundant Hot-swap PowerYes
- CPU TypeIntel Xeon
- CPU Speed2.10 GHz
- CPU SocketLGA 2011-3
- Number of CPU Cores16-Core Processor
- Dual Xeon E5-2683 v4 processors deliver 32 cores at 2.1GHz
- 768GB DDR4 2400MHz ECC memory across 24 DIMM slots
- MegaRAID 9361-8i controller supports RAID 0/1/5/6/10/50/60
- 12 hot-swap 3.5" SATA/SAS drive bays for storage expansion
- Quad 10GBase-T ports via Intel X540 with IPMI 2.0 management
Dual-socket Xeon server for dense storage workloads
The SYS-6028U-TR4T+ is a 2U rackmount system built around two Intel Xeon E5-2683 v4 processors, each running at 2.1 GHz with 16 cores. It ships with 768 GB of DDR4 registered ECC memory across 24 DIMM slots. Twelve hot-plug 3.5-inch bays accept SATA or SAS drives for high-capacity arrays.
RAID controller limits drive count and topology
The installed MegaRAID 9361-8i controller provides eight internal SAS ports with 1 GB cache and battery backup. It supports RAID 0, 1, 5, 6, 10, 50 and 60, but only eight drives can connect directly to the card. Using all twelve bays requires an expander or a second controller, which are not included.
Dual 1000 W titanium power supplies set redundancy
Two hot-swap 1000 W titanium-efficiency units deliver full N+1 redundancy for the configured CPUs, memory and controller. Adding further PCIe cards, GPUs or a full complement of twelve spinning drives may exceed the headroom of a single supply, so buyers planning maximum density should verify total draw before deployment.
Highlights
- Dual Xeon E5-2683 v4 processors deliver 32 cores at 2.1GHz
- 768GB DDR4 2400MHz ECC memory across 24 DIMM slots
- MegaRAID 9361-8i controller supports RAID 0/1/5/6/10/50/60
- 12 hot-swap 3.5" SATA/SAS drive bays for storage expansion
- Quad 10GBase-T ports via Intel X540 with IPMI 2.0 management
Specifications
| Brand | SUPERMICRO |
|---|---|
| Series | CSE-829UAC-R1K02-T |
| Model | SYS-6028U-TR4T+ |
| Rack Height | 1U |
| Redundant Hot-swap Power | Yes |
| CPU Type | Intel Xeon |
| CPU Speed | 2.10 GHz |
| CPU Socket | LGA 2011-3 |
| Number of CPU Cores | 16-Core Processor |
| # of Processors Installed | E5-2683 V4 |
| Installed Memory Size | 768GB |
| Storage Controller | LSI MegaRAID 9361-8i Controller |
| HDD Interface | SATA/SAS |
| SSD (Installed) | No |
| Raid Level | RAID 0/1/5/6/10/50/60 |
| GPU Type | Matrox G200 |
| Video Memory | 8MB |
| Ethernet Controller | SuperMicro AOC-2UR-6-i4XT - Intel X540 - 4x RJ45 10GBase-T Ports |
| Management Port | RJ 45 |
| Features | 12 x 3.5" SATA/SAS Hot-Plug Drive Bays |
Questions about this item
How do I choose between the two installed Xeon E5-2683 v4 processors?
Both sockets are already populated with identical 16-core 2.1 GHz CPUs, so there is no version or capacity choice to make at purchase.
What does the 768 GB DDR4 figure mean for real workloads?
The system ships with 24 modules of 32 GB DDR4-2400 ECC registered memory, filling every slot and delivering the full 768 GB for virtualization or database tasks.
What does the X540 10GBase-T interface cap in practice?
The quad-port Intel X540 controller provides four RJ45 ports, each limited to 10 Gb/s over copper cabling.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
DELL J1-7490AA01 All-in-One PC Core i7-10700 2.9GHz 16GB 512GB SSD 23.8" FHD
- All-in-One PC
- All-in-One
HP J1-800G6AA01 All-in-One PC Core i5-10500 16GB DDR4 512GB NVMe 23.8
- All-in-One PC
- All-in-One



