Supermicro
Supermicro SYS-6028U-TR4T+ 2U rack server 2× Xeon E5-2667 v4 3.2GHz 8-core 32GB DDR4 12× 3.5" bays
2U rack server with dual Xeon E5-2667 v4 processors, 32GB DDR4 ECC memory, twelve 3.5-inch hot-swap drive bays, MegaRAID 9361-8i controller.
- Rack Height1U
- Redundant Hot-swap PowerYes
- CPU TypeIntel Xeon
- CPU Speed3.20 GHz
- CPU SocketLGA 2011-3
- Number of CPU Cores8-Core Processor
- Dual Xeon E5-2667 v4 CPUs run at 3.2 GHz with turbo to 3.6 GHz
- 32 GB DDR4 2400 MHz ECC memory installed across 4 modules
- MegaRAID 9361-8i controller supports RAID 0/1/5/6/10/50/60 with 1 GB cache
- 12 hot-swap 3.5" drive bays for SAS or SATA storage
- Quad 10GBase-T ports via Intel X540 plus dedicated IPMI 2.0 management
Supermicro 2U dual-socket rack server
This new Supermicro SYS-6028U-TR4T+ is a 2U rackmount server system built for dual Intel Xeon processors. It arrives with two E5-2667 v4 CPUs running at 3.2 GHz, each providing eight cores. The system includes 32 GB of DDR4 registered ECC memory across four modules. Twelve hot-plug 3.5-inch drive bays support SATA and SAS drives.
Suits virtualization and database workloads
The dual-processor layout and quad 10GBase-T ports make this server a fit for virtualization clusters, database servers and high-throughput file storage. The MegaRAID 9361-8i controller handles RAID levels up to 60 with 1 GB cache and battery backup. Builders who need more than twelve 3.5-inch bays or a different drive form factor should look elsewhere.
Twelve 3.5-inch hot-plug bays with SAS/SATA support
The chassis provides twelve front-accessible trays that accept 3.5-inch SATA or SAS hard drives and solid-state drives. No drives are installed, so capacity and speed are chosen by the buyer. The onboard LSI MegaRAID 9361-8i controller manages the array through a PCIe 3.0 x8 link.
Highlights
- Dual Xeon E5-2667 v4 CPUs run at 3.2 GHz with turbo to 3.6 GHz
- 32 GB DDR4 2400 MHz ECC memory installed across 4 modules
- MegaRAID 9361-8i controller supports RAID 0/1/5/6/10/50/60 with 1 GB cache
- 12 hot-swap 3.5" drive bays for SAS or SATA storage
- Quad 10GBase-T ports via Intel X540 plus dedicated IPMI 2.0 management
Specifications
| Brand | SUPERMICRO |
|---|---|
| Series | CSE-829UAC-R1K02-T |
| Model | SYS-6028U-TR4T+ |
| Rack Height | 1U |
| Redundant Hot-swap Power | Yes |
| CPU Type | Intel Xeon |
| CPU Speed | 3.20 GHz |
| CPU Socket | LGA 2011-3 |
| Number of CPU Cores | 8-Core Processor |
| # of Processors Installed | E5-2667 V4 |
| Installed Memory Size | 32GB |
| Storage Controller | LSI MegaRAID 9361-8i Controller |
| HDD Interface | SATA/SAS |
| SSD (Installed) | No |
| Raid Level | RAID 0/1/5/6/10/50/60 |
| GPU Type | Matrox G200 |
| Video Memory | 8MB |
| Ethernet Controller | SuperMicro AOC-2UR-6-i4XT - Intel X540 - 4x RJ45 10GBase-T Ports |
| Management Port | RJ 45 |
| Features | 12 x 3.5" SATA/SAS Hot-Plug Drive Bays |
Questions about this item
Will the LGA 2011-3 socket accept my existing Xeon E5-2600 v3 or v4 processors?
Yes, the dual LGA 2011-3 sockets support Xeon E5-2600 v3 and v4 series CPUs, including the installed E5-2667 v4 3.2 GHz 8-core units.
How can I verify the MegaRAID 9361-8i controller and 10GBase-T ports are operational after installation?
Use the IPMI 2.0 KVM-over-LAN via the dedicated RJ45 management port to view POST, controller BIOS, and network link status remotely.
Which items ship with the chassis and which must be purchased separately?
The server includes 2 CPUs, 32 GB DDR4-2400 ECC RDIMMs, 9361-8i RAID card, 12 drive trays, X540 quad 10GBase-T NIC, IPMI 2.0, and dual 1000 W PSUs; rails and front bezel are not included.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
DELL J1-7490AA01 All-in-One PC Core i7-10700 2.9GHz 16GB 512GB SSD 23.8" FHD
- All-in-One PC
- All-in-One
HP J1-800G6AA01 All-in-One PC Core i5-10500 16GB DDR4 512GB NVMe 23.8
- All-in-One PC
- All-in-One



