Supermicro
Supermicro SYS-6018U-TR4T+ 1U rack server 2x Xeon E5-2683 v4 2.1GHz 16C 64GB DDR4 4x 3.5" bays
1U rack server with dual 16-core Xeon E5-2683 v4 CPUs at 2.1 GHz, 64 GB DDR4 ECC, MegaRAID 9361-8i, four 3.5" hot-swap bays, quad 10GBase-T and IPMI 2.0
- Rack Height1U
- Redundant Hot-swap PowerYes
- CPU TypeIntel Xeon
- CPU Speed2.10 GHz
- CPU SocketLGA 2011-3
- Number of CPU Cores16-Core Processor
- Dual 16-core Xeon E5-2683 v4 CPUs at 2.1 GHz base for compute density
- 64 GB DDR4 2400 MHz registered ECC memory installed for data integrity
- MegaRAID 9361-8i with 1 GB cache and battery backs RAID 0/1/5/6/10/50/60
- Four 3.5" hot-plug SAS/SATA bays with trays included for flexible storage
- Quad 10GBase-T ports plus dedicated IPMI 2.0 LAN for high-speed connectivity
Dual Xeon 1U server for dense compute
The Supermicro SYS-6018U-TR4T+ is a 1U rackmount server fitted with two Intel Xeon E5-2683 v4 processors. Each CPU runs at 2.1 GHz with 16 cores and reaches 3.0 GHz turbo. The system ships with 64 GB of DDR4 ECC memory installed across four 16 GB modules. It is built for organisations that need high core density in a single rack unit.
Suits virtualisation and HPC clusters.
This platform targets virtualisation hosts, high-performance computing nodes and cloud infrastructure where thread count and memory bandwidth matter. The Matrox G200 graphics controller provides only basic display output with 8 MB video memory. Buyers who need GPU acceleration or dedicated compute cards should look elsewhere because the 1U chassis does not accommodate add-in accelerators.
Four 3.5-inch hot-plug bays with MegaRAID 9361-8i
Storage connects through four front-accessible 3.5-inch trays that accept SATA or SAS drives. The LSI MegaRAID 9361-8i controller supports RAID 0, 1, 5, 6, 10, 50 and 60 with 1 GB cache and battery backup. No drives are included, so capacity and redundancy depend on the disks you install.
Highlights
- Dual 16-core Xeon E5-2683 v4 CPUs at 2.1 GHz base for compute density
- 64 GB DDR4 2400 MHz registered ECC memory installed for data integrity
- MegaRAID 9361-8i with 1 GB cache and battery backs RAID 0/1/5/6/10/50/60
- Four 3.5" hot-plug SAS/SATA bays with trays included for flexible storage
- Quad 10GBase-T ports plus dedicated IPMI 2.0 LAN for high-speed connectivity
Specifications
| Brand | SUPERMICRO |
|---|---|
| Series | CSE-819U + X10DRU-i+ |
| Model | SYS-6018U-TR4T+ |
| Rack Height | 1U |
| Redundant Hot-swap Power | Yes |
| CPU Type | Intel Xeon |
| CPU Speed | 2.10 GHz |
| CPU Socket | LGA 2011-3 |
| Number of CPU Cores | 16-Core Processor |
| # of Processors Installed | E5-2683 V4 |
| Installed Memory Size | 64GB |
| Storage Controller | LSI MegaRAID 9361-8i Controller |
| HDD Interface | SATA/SAS |
| SSD (Installed) | No |
| Raid Level | RAID 0/1/5/6/10/50/60 |
| GPU Type | Matrox G200 |
| Video Memory | 8MB |
| Ethernet Controller | Supermicro AOC-UR-i4XT - Intel X540 - 4x RJ45 10GBase-T Ports |
| Management Port | RJ 45 |
| Features | 4 x 3.5" SATA/SAS Hot-Plug Drive Bays |
Questions about this item
How deep is the rack that the 1U SYS-6018U-TR4T+ will sit in?
The chassis follows the CSE-819U form factor and occupies a single 1U rack space; depth is determined by the cabinet you choose.
What is the first step when installing the two Xeon E5-2683 v4 CPUs into the LGA 2011-3 sockets?
Open each socket lever, align the processor triangle with the socket marker, place the chip gently without force, then close the lever before fitting the heatsink.
When should the battery on the MegaRAID 9361-8i controller be replaced?
The 1GB cache battery typically lasts several years; replace it when the controller logs a battery-degraded alert or during scheduled hardware refresh cycles.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
DELL J1-7490AA01 All-in-One PC Core i7-10700 2.9GHz 16GB 512GB SSD 23.8" FHD
- All-in-One PC
- All-in-One
HP J1-800G6AA01 All-in-One PC Core i5-10500 16GB DDR4 512GB NVMe 23.8
- All-in-One PC
- All-in-One



