Supermicro
Supermicro SYS-6018U-TR4T+ 1U rack server 2x Xeon E5-2680 v4 32GB DDR4
1U rack server with dual 14-core Xeon E5-2680 v4 CPUs, 32 GB DDR4 ECC memory, MegaRAID 9361-8i controller, four 3.5" hot-swap bays, quad 10GBase-T ports and redundant 750 W power supplies
- Rack Height1U
- Redundant Hot-swap PowerYes
- CPU TypeIntel Xeon
- CPU Speed2.40 GHz
- CPU SocketLGA 2011-3
- Number of CPU Cores14-Core Processor
- Dual Xeon E5-2680 v4 14-core processors at 2.4 GHz base speed
- 32 GB DDR4 2400 MHz registered ECC memory installed
- MegaRAID 9361-8i controller with 1 GB cache and battery backup
- Four 3.5" hot-plug SAS/SATA drive bays in 1U chassis
- Quad 10GBase-T ports plus dedicated IPMI 2.0 management LAN
1U Rack Server Dual Xeon
The Supermicro SYS-6018U-TR4T+ is a 1U rackmount server system equipped with two Intel Xeon E5-2680 v4 processors. Each CPU provides 14 cores at 2.4 GHz with a 3.3 GHz turbo frequency. The system includes 32 GB of DDR4 ECC registered memory across four modules. It is built for dense compute tasks in data centre racks.
Virtualisation Hosts Not High-Density Storage
This server suits organisations running virtualisation, high-performance computing or cloud workloads that benefit from dual-socket parallelism and 10 GbE connectivity. The four 3.5-inch hot-plug bays limit internal spindle count, so buyers who need more than four drive slots must choose a different chassis. The Matrox G200 graphics with 8 MB video memory is for management only, not graphical workloads.
LSI MegaRAID 9361-8i Controller
Storage is handled by an LSI MegaRAID 9361-8i 8-port SAS 12 Gb/s PCIe RAID controller with 1 GB cache and battery backup. It supports RAID 0, 1, 5, 6, 10, 50 and 60 across SATA and SAS drives. This controller determines how many arrays can be built and what redundancy levels are available.
Highlights
- Dual Xeon E5-2680 v4 14-core processors at 2.4 GHz base speed
- 32 GB DDR4 2400 MHz registered ECC memory installed
- MegaRAID 9361-8i controller with 1 GB cache and battery backup
- Four 3.5" hot-plug SAS/SATA drive bays in 1U chassis
- Quad 10GBase-T ports plus dedicated IPMI 2.0 management LAN
Specifications
| Brand | SUPERMICRO |
|---|---|
| Series | CSE-819U + X10DRU-i+ |
| Model | SYS-6018U-TR4T+ |
| Rack Height | 1U |
| Redundant Hot-swap Power | Yes |
| CPU Type | Intel Xeon |
| CPU Speed | 2.40 GHz |
| CPU Socket | LGA 2011-3 |
| Number of CPU Cores | 14-Core Processor |
| # of Processors Installed | E5-2680 V4 |
| Installed Memory Size | 32GB |
| Storage Controller | LSI MegaRAID 9361-8i Controller |
| HDD Interface | SATA/SAS |
| SSD (Installed) | No |
| Raid Level | RAID 0/1/5/6/10/50/60 |
| GPU Type | Matrox G200 |
| Video Memory | 8MB |
| Ethernet Controller | Supermicro AOC-UR-i4XT - Intel X540 - 4x RJ45 10GBase-T Ports |
| Management Port | RJ 45 |
| Features | 4 x 3.5" SATA/SAS Hot-Plug Drive Bays |
Questions about this item
How do I install the LSI MegaRAID 9361-8i controller and what step is often missed?
The 9361-8i installs in a PCIe slot; the step often missed is connecting the supercapacitor module for the 1 GB cache backup so write-back mode can be enabled safely.
What maintenance will the MegaRAID 9361-8i cache battery need later?
The supercapacitor on the 9361-8i replaces a traditional battery and requires no scheduled replacement, but the controller firmware should be updated periodically to maintain compatibility with new drives.
What limit appears first when all four 10GBase-T ports run sustained load?
The Intel X540 controller’s thermal output in a 1U chassis typically becomes the bottleneck before the dual Xeon E5-2680 v4 CPUs reach their maximum turbo frequency.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
DELL J1-7490AA01 All-in-One PC Core i7-10700 2.9GHz 16GB 512GB SSD 23.8" FHD
- All-in-One PC
- All-in-One
HP J1-800G6AA01 All-in-One PC Core i5-10500 16GB DDR4 512GB NVMe 23.8
- All-in-One PC
- All-in-One



