Superior Electric
Superior Electric YGP017F Twist Lock Receptacle 30A 250V NEMA L6-30R
A 30 A, 250 V NEMA L6-30R twist-lock receptacle with a nylon body and UL approval for secure wall-mount power connections
- TypePlug Adapters
- 30 A rating supports high-draw equipment
- 250 V capacity suits generator and machinery circuits
- NEMA L6-30R twist-lock prevents accidental disconnection
- UL-listed construction meets recognised safety standards
- Nylon housing resists impact in industrial environments
Industrial twist-lock receptacle
The Superior Electric YGP017F is a wall-mount NEMA L6-30R receptacle rated for 30 amps at 250 volts. It accepts a three-wire locking plug for single-phase equipment such as gasoline generators and heavy machinery. The twist-lock mechanism prevents accidental disconnection caused by vibration or impact in commercial and industrial environments. UL listed for safety compliance.
Sustained-load behaviour
The nylon body and locking contacts maintain a secure circuit during continuous 30-amp operation without the intermittent faults common with straight-blade connectors. Twist engagement keeps the blades fully seated even when cables are pulled or equipment shifts. This stability reduces heat build-up at the contact interface over long duty cycles. The receptacle is intended for hard-wired installation onto a suitable junction box.
Build quality and mounting
Moulded nylon construction resists cracking, chemicals and UV exposure in workshop or job-site conditions. The wall-mount flange allows direct fastening to a standard electrical box for a flush, low-profile fit. Locking action is audible and tactile, confirming full engagement without tools. The device is supplied as a single unit ready for professional wiring by a qualified electrician.
Highlights
- 30 A rating supports high-draw equipment
- 250 V capacity suits generator and machinery circuits
- NEMA L6-30R twist-lock prevents accidental disconnection
- UL-listed construction meets recognised safety standards
- Nylon housing resists impact in industrial environments
Specifications
| Type | Plug Adapters |
|---|
Questions about this item
Does the 30 A 250 V receptacle generate noticeable heat when powering a generator continuously?
The nylon body and UL-approved design handle the rated 30 A at 250 V without excess heat under normal continuous loads.
What wiring must already be in place for this NEMA L6-30R to function?
A dedicated 30 A 250 V circuit with three conductors — two hots and a ground — terminated in a compatible wall box.
Will my existing L6-30P plug lock securely into this YGP017F receptacle?
Yes, the twist-lock mechanism mates with any standard NEMA L6-30P plug for a vibration-resistant connection.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Ideal 2011s Splice Connector For 2014 Bare Copper Pack 50
- Bare Copper
Bryant Locking Straight Blade Plug L6-20P 20A 250V 2.0HP Black/White 70620
- HAWA



