We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green PCI circuit board with single BNC port and cable attached

SunnyStar Co., Ltd

SunnyStar Co., Ltd TE110P Single T1/E1 PCI VoIP Card with BNC Cable

SKU CH-GYKC-WP3KM

A single-span PCI card that provides one selectable T1 or E1 port with 24 or 32 channels for Asterisk PBX systems

  • Single T1 or E1 span handles 24 or 32 channels
  • PCI 3.3V/5V slot works without extra drivers
  • Mix voice and data on one card
  • TDMoE links multiple PCs for scalable PBX
  • Supports RBS and PRI signalling standards

SunnyStar TE110P Single-Span T1/E1 PCI Card

The SunnyStar TE110P is a single-port PCI telephony card that provides one selectable T1 or E1 span for Asterisk-based IP-PBX systems. It installs in a standard 3.3 V or 5 V PCI slot and auto-configures under Asterisk without a separate driver installation. The card ships new in an ESD bag with a BNC cable included for the physical line connection.

For Asterisk builders needing one T1/E1 link

This card suits integrators deploying a single T1 (24-channel) or E1 (32-channel) circuit into an existing PCI-equipped server running Asterisk, TrixBOX, Elastix or compatible distributions. It supports both voice and data channels on the same span, including RBS and PRI signalling. Builders who require more than one simultaneous span, a PCI Express interface, or native SS7 stack offload should evaluate other options.

Single selectable T1/E1 span on legacy PCI

The decisive specification is the single selectable span that delivers either 24 T1 channels or 32 E1 channels over a legacy PCI bus. That constraint determines whether the card fits the available slot and satisfies the channel-count requirement for the target PBX deployment.

Highlights

  • Single T1 or E1 span handles 24 or 32 channels
  • PCI 3.3V/5V slot works without extra drivers
  • Mix voice and data on one card
  • TDMoE links multiple PCs for scalable PBX
  • Supports RBS and PRI signalling standards

Specifications

BrandVoIP
ModelTE110P

Questions about this item

What comes in the box and do I need to buy anything else?

The card ships new in an ESD bag inside a small carton with a BNC cable included. No driver is required under Asterisk; the card auto-configures on installation.

Which version or capacity should I choose for my PBX?

The TE110P is a single-span card that you set to T1 for 24 channels or E1 for 32 channels; add further TE110P cards to the same PC if you need more spans.

What does the 24 or 32 channel figure mean once the card is installed?

In T1 mode the span carries 24 channels and in E1 mode 32 channels; you can split them, for example 12 voice and 12 data channels, all routed through the Asterisk PBX without an external router.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.