We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black scissor-arm boom stand with desk clamp, two 35 cm arms and 3/8 to 5/8 adapter

SUNMON Boom Arm Stand for Elgato Wave 3, 35 cm arms, 1.4 kg load

SKU CH-ZXKF-3CG72

A desktop boom arm with 35 cm sections, dual suspension springs and a clamp for desks up to 4.8 cm thick, supporting microphones up to 1.4 kg

  • FinishBlack
  • Length18 ft.
  • SpecificationDesktop Stands, Clamp, 27.6 inches
  • FeatureDesktop Stands
  • Dimension14.33in W x 12.83in H x 9.06in D
  • Weight1.4 kilograms
  • Designed for Elgato Wave 3 microphone compatibility
  • Dual suspension springs on each arm prevent shaking and noise
  • Extends up to 26.8 in / 68 cm for flexible positioning
  • Clamps to desks up to 1.89 in / 4.8 cm thick with protective sponge base
  • Supports up to 1.4 kg / 3.1 lb with sturdy steel construction

Compatible Boom Arm for Elgato Wave 3

This desk-mounted scissor arm is designed specifically for the Elgato Wave 3 USB condenser microphone. Two 35 cm arms give a maximum horizontal reach of 68 cm so you can position the mic close to your mouth without leaning forward. A 3/8-to-5/8-inch screw adapter is included for the Wave 3 shock mount. Maximum supported weight is 1.4 kg.

Upgrade from fixed desktop stands

A static desktop stand forces you to hunch toward the capsule and transmits every desk vibration into the recording. This arm lets you pull the microphone into the optimal spot and swing it aside when not in use. The improvement is worth it whenever you record speech for long sessions and need consistent mouth-to-mic distance without neck strain.

Limits of the clamp mounting system

The supplied C-clamp fits desks up to 4.8 cm thick; thicker surfaces will not accept the clamp without a spacer. Combined arm extension reaches 68 cm horizontally, so very deep desks may leave the microphone short of the sweet spot. The dual-spring mechanism is calibrated for loads up to 1.4 kg; heavier microphones will cause the arm to sag over time.

Highlights

  • Designed for Elgato Wave 3 microphone compatibility
  • Dual suspension springs on each arm prevent shaking and noise
  • Extends up to 26.8 in / 68 cm for flexible positioning
  • Clamps to desks up to 1.89 in / 4.8 cm thick with protective sponge base
  • Supports up to 1.4 kg / 3.1 lb with sturdy steel construction

Specifications

BrandAvid
ModelMPN_SM_M_Stand35_Wave3_01
Part NumberMPN_SM_M_Stand35_Wave3_01
FinishBlack
Length18 ft.
SpecificationDesktop Stands, Clamp, 27.6 inches
FeatureDesktop Stands
Dimension14.33in W x 12.83in H x 9.06in D
Weight1.4 kilograms

Questions about this item

What desk thickness does the supplied clamp accept?

The metal table clamp fits desktops up to 1.89 inches or 4.8 cm thick and includes a sponge pad to prevent scratches when tightening the side screw.

How do I attach the Wave 3 to the arm, and what step is often missed?

Thread the included 3/8‑to‑5/8 inch screw adapter into the microphone's mount, then secure it to the arm's 5/8 inch stud; forgetting the adapter leaves the threads mismatched.

What upkeep does the dual‑spring mechanism need over time?

Periodically check the tension knobs on both 35 cm arms and tighten them if the 1.4 kg load starts to sag; no lubrication is required for the internal springs.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.