We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White matte PLA filament spool 1.75mm 1kg

SUNLU PLA Matte Filament 1.75mm 1kg White

SKU CH-C807-3570P

1.75 mm PLA filament on a 1 kg spool with a matte finish that hides layer lines and ±0.02 mm dimensional accuracy for consistent feeding

  • Color1000g Pla White
  • MaterialPolylactic Acid
  • Diameter1.75
  • Weight1 kilograms
  • Matte frosted texture hides layer lines for a clean look
  • Neatly wound spool prevents knots and improves print reliability
  • Dimensional accuracy within ±0.02 mm ensures consistent feeding
  • Vacuum-sealed dry packaging eliminates moisture for clog-free extrusion
  • Standard 1.75 mm diameter fits most FDM 3D printers

Matte PLA Filament for FDM Printers

SUNLU PLA Matte filament comes in a 1kg spool of 1.75mm diameter polylactic acid. The matte white finish produces a frosted texture that hides layer lines on printed parts. It suits hobbyists, educators and makers who want a low-gloss surface without post-processing.

Print Temperature Range and Low Warping

Recommended nozzle temperature is 200 to 230°C and bed temperature 50 to 65°C. Dimensional accuracy is held to ±0.02mm, giving consistent feeding and stable prints with minimal warping. The material is manufactured in a dry environment and vacuum-sealed to prevent moisture absorption, reducing clogging and bubbling during extrusion.

Neatly Wound Spool for Reliable Feeding

The 1kg spool measures 8.00 inches in diameter, 2.50 inches wide with a 2.20 inch hub hole, fitting many FDM printer holders. Advanced winding eliminates knots and tangles, improving print efficiency. Recommended print speed is 50 to 100mm/s for reliable results.

Highlights

  • Matte frosted texture hides layer lines for a clean look
  • Neatly wound spool prevents knots and improves print reliability
  • Dimensional accuracy within ±0.02 mm ensures consistent feeding
  • Vacuum-sealed dry packaging eliminates moisture for clog-free extrusion
  • Standard 1.75 mm diameter fits most FDM 3D printers

Specifications

BrandSUNLU
ModelFR-PLAYG-WT-1KG
Color1000g Pla White
MaterialPolylactic Acid
Diameter1.75
Weight1 kilograms

Questions about this item

How do I install this filament and what step causes the most feeding issues?

Mount the 8.00" spool on your printer holder, thread the 1.75mm filament through the guide tube into the extruder, then preheat the nozzle to 200-230°C and bed to 50-65°C; the step most users skip is letting the nozzle purge old material completely before starting the first layer.

What maintenance or replacement will this 1kg spool need during its life?

The vacuum-sealed spool arrives dry; store it sealed with desiccant after opening to prevent moisture absorption, and replace the spool once the 1000g of PLA is consumed — no other consumable parts are involved.

What limit appears first during a long print at the recommended 50-100mm/s speed?

The ±0.02mm dimensional tolerance keeps extrusion consistent, so the first practical limit is the 1kg spool length — plan prints that fit within the remaining filament weight to avoid mid-print run-out.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.