SUNLU PLA+ Filament 1.75 mm White 1 kg AWJP-PLA+-WT-1KG
PLA+ filament in 1.75 mm white on a 1 kg spool with ±0.02 mm accuracy and clog-free winding
- Color1000g Pla Plus White
- MaterialPolylactic Acid
- Diameter1.75
- Weight1 kilograms
- 3× stronger than standard PLA for durable prints
- Tangle-free spool winding prevents knots and improves efficiency
- ±0.02 mm diameter accuracy fits almost all 1.75 mm FDM printers
- 210–235 °C nozzle and 55–65 °C bed settings give reliable extrusion
- 1 kg spool on 8.00″ × 2.50″ reel with 2.20″ hub suits many printer mounts
PLA Plus Filament 1.75 mm 1 kg spool
This SUNLU PLA+ spool delivers 1 kg of 1.75 mm polylactic acid filament in white. It is intended for makers and hobbyists running FDM 3D printers that accept 1.75 mm material. The spool dimensions are 8.00" diameter, 2.50" width and a 2.20" hub hole, fitting most printer mounts. Print temperatures of 210 °C to 235 °C and bed temperatures of 55 °C to 65 °C are recommended.
Dimensional accuracy and winding under long prints
The filament holds a diameter tolerance of ±0.02 mm, which keeps extrusion consistent during extended jobs. Manufacturer highlights claim the spool is neatly wound without knots or tangles, reducing feed interruptions over many hours. Improved layer adhesion and resistance to warping help large parts stay dimensionally stable. Clog, bubble and stringing resistance further supports unattended overnight runs.
Practical limits of 1.75 mm FDM compatibility
The 1.75 mm diameter works with almost all FDM printers that use this standard, including popular models such as Ender 3 and Ender 3 V2. Nozzle temperatures above 235 °C or bed temperatures above 65 °C fall outside the recommended window and may degrade print quality. The 1 kg spool capacity sets a hard limit on single-print volume before a changeover is required. Users needing higher-temperature materials or larger continuous builds must choose a different filament class.
Highlights
- 3× stronger than standard PLA for durable prints
- Tangle-free spool winding prevents knots and improves efficiency
- ±0.02 mm diameter accuracy fits almost all 1.75 mm FDM printers
- 210–235 °C nozzle and 55–65 °C bed settings give reliable extrusion
- 1 kg spool on 8.00″ × 2.50″ reel with 2.20″ hub suits many printer mounts
Specifications
| Brand | SUNLU |
|---|---|
| Model | AWJP-PLA+-WT-1KG |
| Color | 1000g Pla Plus White |
| Material | Polylactic Acid |
| Diameter | 1.75 |
| Weight | 1 kilograms |
Questions about this item
Does the PLA+ filament produce noticeable odour or require extra ventilation when printing continuously at 210 °C to 235 °C?
The material is polylactic acid and prints at 210 °C to 235 °C with a bed at 55 °C to 65 °C; it is described as clog, bubble, tangle, warping and stringing free, which reduces fumes during long sessions.
What printer hardware is needed to use the 1.75 mm diameter spool with its 8.00" diameter and 2.20" hub hole?
Any FDM 3D printer that accepts 1.75 mm filament and can mount an 8.00" spool with a 2.20" centre hole — examples include Ender 3 and Ender 3 V2 — will work without adapters.
Will the +/- 0.02 mm tolerance cause extrusion issues on an older Bowden setup that struggles with diameter variance?
The tight +/- 0.02 mm accuracy and neatly wound spool are designed to prevent knots and inconsistent feeding, improving reliability on both Bowden and direct-drive extruders.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
