We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact black PSU tester with LCD screen and multiple connector ports

SUIUBUY

SUIUBUY 20/24 Pin LCD Power Supply Tester

SKU CH-09J9-91P6V

Tests ATX, BTX and ITX power supplies with LCD voltage readouts and audible alerts for SATA, floppy, HDD, CDROM, 4-pin, 6-pin and 8-pin connectors

  • Tests ATX, BTX and ITX power supplies with LCD voltage readout
  • Audible "DuDu" alarm signals missing or out-of-range voltages
  • Checks 20 and 24-pin main connectors plus P4, P6 and P8 CPU plugs
  • Supports Floppy, HDD, CDROM, SATA, 4-pin, 6-pin and 8-pin connectors
  • Quick functional verification for hobbyists and trade technicians

SUIUBUY 20/24 Pin LCD Power Supply Tester

This device checks ATX, BTX and ITX power supplies by connecting their 24-pin, P4, P6 or P8 connectors to the tester. An LCD shows the status of each voltage rail while an audible buzzer signals normal or abnormal readings. It is built for hobbyists and technicians who need a quick functional verification of a PSU.

Thermals, noise and power draw

The tester draws its operating power directly from the supply under test, so it adds no extra load to the bench. It runs silently apart from the built-in buzzer that emits a short tone for normal voltage and a sustained tone when a rail is missing or out of range. No fan or active cooling is present on the unit.

Connectors and what they enable

Included jacks cover Floppy, HDD, CD-ROM, SATA, 4-pin (P4), 8-pin (Dual-CPU) and 6-pin (PCI-Express) power leads, letting you test every major output of a desktop PSU in one session. Builders who need to validate server-grade EPS12V or newer 12VHPWR cables cannot do so with this tester.

Highlights

  • Tests ATX, BTX and ITX power supplies with LCD voltage readout
  • Audible "DuDu" alarm signals missing or out-of-range voltages
  • Checks 20 and 24-pin main connectors plus P4, P6 and P8 CPU plugs
  • Supports Floppy, HDD, CDROM, SATA, 4-pin, 6-pin and 8-pin connectors
  • Quick functional verification for hobbyists and trade technicians

Specifications

No published specifications for this item yet.

Questions about this item

How do I connect the 24-pin ATX and CPU power cables to the tester for the first check?

Plug the PSU 24-pin and P4, P6 or P8 connectors into the matching jacks on the tester, then power on the supply.

What upkeep does the LCD voltage tester require over time?

No periodic maintenance is needed; keep the connector pins clean and store the unit dry.

At what point does the tester signal a fault during a prolonged load test?

A continuous "DuDu" buzzer and flickering voltage or PG readings indicate a detected voltage outside normal limits.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.