Advance Tabco
Advance Tabco FC-1-1818-X Wall Mounted Sink 18 in x 18 in, 304
- Silver
$790.99
0.00952277BTC
In stock
Sugatsune
Sugatsune HG-BH60 304 Stainless Steel Weld-On Butt Hinge 2
304 stainless steel weld-on butt hinge with 5.7 lb load capacity, 180-degree swing and five holes per leaf
- TypeDoor Hardware & Components
- 304 stainless steel resists corrosion in wet environments
- 7 lb load capacity supports lightweight doors and panels
- 180 degree range of motion allows full swing clearance
- Weld-on mounting creates a permanent tamper-resistant joint
- Non-handed design fits left or right-hand installations
Sugatsune HG-BH60 304 Stainless Steel Weld-On Butt
This Sugatsune HG-BH60 is a 304 stainless steel butt hinge designed for weld-on installation. It provides a 5.7 lb load capacity and 180 degrees of motion with a plain bearing. The hinge features rounded corners and a satin finish for corrosion resistance in door applications.
Suits metal gates and doors needing permanent weld
Builders requiring screw-fixed or bolt-on hinges cannot use this weld-on model. Projects demanding ligature-resistant hardware should look elsewhere as this hinge is not ligature resistant. Applications exceeding the 5.7 lb load rating need a heavier-duty alternative.
5.7 lb load capacity sets the usage limit
The hinge supports a maximum load of 5.7 lb across its two leaves. Each leaf measures 0.219 in thick with five pre-drilled holes for alignment during welding. Both leaves share identical 2 3/8 in height and 2 1/2 in width dimensions for symmetrical fit.
Highlights
- 304 stainless steel resists corrosion in wet environments
- 7 lb load capacity supports lightweight doors and panels
- 180 degree range of motion allows full swing clearance
- Weld-on mounting creates a permanent tamper-resistant joint
- Non-handed design fits left or right-hand installations
Specifications
| Brand | SUGATSUNE |
|---|---|
| Type | Door Hardware & Components |
Questions about this item
Should I pick the 60 model or a different size for a heavier door?
The HG-BH60 is rated for a 5.7 lb load capacity per hinge, so choose it only if your door weight stays within that limit.
What does the 180-degree range mean once the hinge is welded on?
It allows the door to swing fully flat against the adjacent wall, giving maximum clear opening without mechanical interference.
How does the plain bearing type affect daily operation?
Plain bearing hinges operate with direct metal-to-metal contact, so they are durable for weld-on use but may feel stiffer than ball-bearing versions over time.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
