We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black rubber XLR microphone cable six feet long

Strukture

Strukture 6' 6mm Rubber XLR Microphone Cable

SKU CH-97MJ-HQDXP

A six-foot XLR microphone cable with rubber jacket, shrink-wrap strain relief and thick ABS protection at the solder joints

  • Reinforced rubber jacket resists wear
  • Shrink-wrap sleeve prevents termination separation
  • Thick ABS inner sleeve shields solder joints
  • Six-foot length suits stage and studio use
  • Minimal packaging keeps cost low without quality loss

Purpose & Audience

The Strukture 6' 6mm Rubber XLR Microphone Cable is built for musicians, podcasters and live-sound engineers who need a dependable balanced-audio link between microphones and mixing equipment. Its straightforward XLR-to-XLR layout suits stage, studio and rehearsal-room setups where reliability matters more than exotic specifications.

Thermals Noise & Power

As a passive analogue cable it draws no power and generates no heat, so thermal management and fan noise are non-issues. The high-quality rubber jacket and state-of-the-art shrink-wrap sleeve protect the conductors from handling noise and external interference during normal use.

Build Integration

The six-foot length reaches comfortably across small stages or desktop booths without excess slack that would need coiling. Thick ABS inner sleeves guard the solder joints at each connector, reducing the risk of failure when the cable is repeatedly plugged and unplugged, while the reinforced rubber exterior resists kinking when routed around stands or pedalboards.

Highlights

  • Reinforced rubber jacket resists wear
  • Shrink-wrap sleeve prevents termination separation
  • Thick ABS inner sleeve shields solder joints
  • Six-foot length suits stage and studio use
  • Minimal packaging keeps cost low without quality loss

Specifications

No published specifications for this item yet.

Questions about this item

How do I connect the 6' cable to my microphone and interface without damaging the XLR plugs?

Push each XLR connector straight in until the latch clicks, then pull gently to confirm it is locked; avoid twisting the cable near the plugs because the thick ABS inner sleeve protects the solder joints but the rubber jacket can still kink if forced sideways.

What part of this cable is most likely to wear out first and need replacement?

The rubber outer covering and the shrink-wrap sleeve at each termination point take the most bending stress, so inspect them regularly for cracks or separation; if the jacket splits near the ABS sleeve the cable should be retired.

What is the practical length limit before signal loss becomes noticeable on this 6' run?

At 6 feet the cable is well within the distance where balanced XLR lines reject noise without audible level drop, so the first limit you will hit is physical reach rather than electrical degradation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.