We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Ten white polypropylene sorbent strips, 4 1/2 by 48 inches, flat rectangular sheets

STRIPPER STOP 280249 Sorbent Strip 4 1/2 in x 48 in White 10 Pack

SKU CH-6SEV-92DG0

White polypropylene sorbent strips absorb water-based cleaners, finishes and strippers, each pad holding 16 5/8 oz for a total of 91 oz per ten-pack

  • Absorbs up to 16 5/8 oz per strip for fast spill control
  • Ten strips per pack deliver 91 oz total absorption capacity
  • Polypropylene construction handles water-based cleaners, finishes and strippers
  • Two-layer design adds strength without perforation tears
  • White colour shows saturation level at a glance

Sorbent Strip for Water-Based Strippers

STRIPPER STOP 280249 is a polypropylene sorbent strip sized 4 1/2 in x 48 in. Each white strip absorbs up to 16 5/8 oz of water-based floor cleaners, finishes or strippers. The pack contains ten two-layer strips for a total absorption of 91 oz. Use them to contain spills during floor maintenance.

For floor-care crews handling water-based chemicals

These strips suit janitorial teams and maintenance workers who need to catch liquid runoff from water-based strippers and finishes. They are not intended for oil-only spills or aggressive solvent spills that require a different sorbent chemistry. Buyers needing perforated sheets or a smaller roll width should look at other formats.

Absorption capacity per strip 16 5/8 oz

The single figure that decides fit is the volume each pad can hold: 16 5/8 oz. Match this number against the typical spill size on your job site to confirm the quantity required.

Highlights

  • Absorbs up to 16 5/8 oz per strip for fast spill control
  • Ten strips per pack deliver 91 oz total absorption capacity
  • Polypropylene construction handles water-based cleaners, finishes and strippers
  • Two-layer design adds strength without perforation tears
  • White colour shows saturation level at a glance

Specifications

BrandSTRIPPER STOP

Questions about this item

What width and length does each sorbent strip measure for placement under floor-machine pads?

Each strip measures 4 1/2 inches wide by 48 inches long, sized to sit beneath standard floor-machine pads during stripping or finishing.

How are the strips positioned during installation, and what common mistake should be avoided?

Lay each white polypropylene strip flat on the floor before lowering the machine pad; the common mistake is folding or overlapping strips, which reduces the 16 5/8 oz absorption capacity per strip.

When do the strips need replacement during a stripping job?

Replace a strip once it reaches its 16 5/8 oz absorption limit; a 10-pack provides 91 oz total capacity for the full job.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.