We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blue amplifier wiring kit with line output converter and fuse holder

STINGER

STINGER SS600XS 8GA Copper 600W Wiring Kit with Kicker 46KISLOC2 Line Output Converter factory integration

SKU CH-C1Y2-7V8P4

An 8-gauge copper wiring kit rated for 600 watts paired with a two-channel line output converter that accepts up to 55 watts and delivers an 8-volt signal

  • TypeLine Output Adapters
  • Factory integration without new head unit using Kicker 46KISLOC2 converter
  • Handles 55 watts input for compatibility with most factory radios
  • Delivers clean 8-volt output signal to aftermarket amplifier
  • Full 20Hz-20kHz frequency response preserves audio quality at all volumes
  • 600-watt 8-gauge copper wiring kit provides complete installation power delivery

Complete 8-Gauge Wiring Bundle

This kit combines a Stinger SS600XS 8-gauge copper wiring set rated for 600 watts with a Kicker 46KISLOC2 two-channel line-output converter. It targets installers adding an aftermarket amplifier to a factory stereo that lacks dedicated RCA outputs. The bundle supplies every cable, fuse holder and connector needed for a single-amplifier installation in one package.

Converter Adds Clean Signal and Turn-On

The Kicker 46KISLOC2 accepts up to 55 watts or 16 volts from speaker-level outputs and delivers up to an 8-volt RCA signal with a flat 20Hz-20kHz response. Its built-in 100 milli-amp remote turn-on lead eliminates the need for a separate 12-volt trigger wire. An LED indicator confirms DC-offset turn-on status, and the unit works with standard radios and most smart radios whose amplifier output impedance is 60 ohms or lower.

Verify Radio Output and Power Demands

Before ordering, confirm that your factory radio’s speaker-level output does not exceed 55 watts per channel and that the amplifier output impedance is 60 ohms or less for smart-radio compatibility. Ensure the 600-watt rating of the 8-gauge copper power wire matches the amplifier’s actual current draw and that the included fuse holder and terminals suit your battery and ground locations.

Highlights

  • Factory integration without new head unit using Kicker 46KISLOC2 converter
  • Handles 55 watts input for compatibility with most factory radios
  • Delivers clean 8-volt output signal to aftermarket amplifier
  • Full 20Hz-20kHz frequency response preserves audio quality at all volumes
  • 600-watt 8-gauge copper wiring kit provides complete installation power delivery

Specifications

TypeLine Output Adapters

Questions about this item

Will the 8-gauge copper power cable in the SS600XS kit need upgrading if I add a larger amplifier later?

The included 8-gauge copper cable supports up to 600 watts; a higher-power amplifier would require thicker gauge wire for safe current delivery.

What input voltage limit on the Kicker 46KISLOC2 converter appears first when the factory radio is driven hard?

The converter accepts up to 16 volts or 55 watts of speaker-level signal before clipping can occur.

How much heat does the line-output converter produce during all-day operation?

The 46KISLOC2 draws only 100 milliamps for its remote turn-on circuit and needs no 12-volt power, so heat output is minimal.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.