We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
A wiring kit box and a small black converter module with terminals

STINGER

STINGER SS1200XS 4GA 1200W Kit + Kicker 46KISLOC2 LOC

SKU CH-XV3H-0TSY7

Bundle adds an amplifier to a factory radio using a 2-channel line-output converter with remote turn-on and a 4-gauge copper 1200 W wiring kit

  • TypeLine Output Adapters
  • Bundle adds an amplifier to almost any factory radio with the Kicker 46KISLOC2 converter
  • Flat frequency response at all volumes without inductors in the KISLOC2 design
  • Converter accepts up to 55 watts and 16 volts from speaker-level inputs
  • 12 V 100 mA remote turn-on output powers multiple amplifiers from DC offset
  • Complete 4-gauge copper wiring kit rated for 1200 W supplies power and ground

Bundle Contents

This kit pairs a Stinger SS1200XS 4GA copper wiring kit rated for 1200W with a Kicker 46KISLOC2 2-channel line output converter. It suits installers adding an aftermarket amplifier to a factory stereo without replacing the head unit. A Creative Audio coozy is also included in the package.

Thermals and Power

The wiring kit uses 4-gauge copper conductors sized for 1200W amplifier loads. The converter accepts up to 55 watts or 16 volts of speaker-level input signal. Its internal circuitry generates a 12-volt remote turn-on output capable of 100 milli-amp current to switch multiple amplifiers.

Converter Benefits

The KISLOC2 operates without inductors to provide a flat frequency response across all volume levels. It converts speaker wires into RCA outputs and a DC-offset remote trigger automatically. The design works with standard radios and most smart factory systems for straightforward integration.

Highlights

  • Bundle adds an amplifier to almost any factory radio with the Kicker 46KISLOC2 converter
  • Flat frequency response at all volumes without inductors in the KISLOC2 design
  • Converter accepts up to 55 watts and 16 volts from speaker-level inputs
  • 12 V 100 mA remote turn-on output powers multiple amplifiers from DC offset
  • Complete 4-gauge copper wiring kit rated for 1200 W supplies power and ground

Specifications

TypeLine Output Adapters

Questions about this item

How do I wire the Kicker 46KISLOC2 converter and where is the common mistake?

Tap the factory speaker wires into the converter inputs; it creates a 12 V remote turn-on from DC offset so you do not need a separate switched 12 V source. The step people miss is setting the factory radio volume high enough for clean signal detection.

What part of this kit will need replacement first?

The 4 GA copper power and ground cables in the Stinger SS1200XS kit can degrade if the crimp terminals loosen or the jacket is abraded; inspect them annually and re-crimp or replace any corroded sections.

What limit appears first when the system runs at full output for a long time?

The Kicker 46KISLOC2 accepts up to 55 watts (16 volts) of input signal; sustained clipping at that level will trigger its protection before the 1200 W wiring kit reaches its current ceiling.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.