STINGER
STINGER SI121.5 1000 Series 1.5ft RCA Cable 2-Channel Stereo Twisted car electronics accessory
A 1.5-foot two-channel RCA interconnect cable with twisted coaxial construction for noise rejection and ShocKrome connectors for corrosion resistance
- TypeCar Stereo Add-Ons
- Audiophile-grade sound from 1000 Series construction
- Two conductors per channel ensure true stereo separation
- Noise-rejecting coaxial design blocks interference
- ShocKrome connectors resist corrosion for lasting conductivity
- 5-foot length suits tight in-car installations
1.5-foot 1000 Series stereo interconnect
This 1.5-foot RCA cable belongs to the 1000 Series and carries two-channel stereo signals for car audio systems. It uses two conductors per channel to maintain channel separation and deliver audiophile grade performance. The short length suits tight installations between source units and amplifiers or processors.
Twisted coaxial build with ShocKrome ends
A noise-rejecting coaxial construction shields the signal from interference in the vehicle environment. Compact moulded connectors are colour coded for quick channel identification and feature ShocKrome plating for corrosion resistance. Heavy gauge conductors and high-strength moulded strain reliefs withstand repeated connection cycles and vibration.
Continuous Connection Construction for clean
Continuous Connection Construction (C3 Tech) maintains an unbroken signal path from end to end, reducing loss and preserving detail. The twisted pair geometry and coaxial shielding keep noise floor low during normal operation. Passive design draws no power and adds no active circuitry to the signal chain.
Highlights
- Audiophile-grade sound from 1000 Series construction
- Two conductors per channel ensure true stereo separation
- Noise-rejecting coaxial design blocks interference
- ShocKrome connectors resist corrosion for lasting conductivity
- 5-foot length suits tight in-car installations
Specifications
| Type | Car Stereo Add-Ons |
|---|
Questions about this item
How does the 1000 Series coaxial construction limit noise on this 1.5 ft RCA cable?
The noise rejecting coaxial design shields each channel from interference along the full 1.5 foot length, preserving stereo separation in a car environment.
What clearance do the compact molded ShocKrome ends need behind a head unit or amp?
The low profile molded ends with color coded identifiers fit tight rack spaces and only require the depth of a standard RCA jack plus a few millimetres for the strain relief.
What is the correct way to seat the Continuous Connection Construction plugs so the C3 Tech contact is made?
Push each ShocKrome plug straight in until the molded collar meets the jack; twisting or rocking the cable can leave the center pin partially disengaged.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
PAC APH-TY02 Speaker Connection Harness Toyota Lexus 18
- Car Stereo Add-Ons
The Wires Zone Platinum 1/0 AWG Ring Terminals Pair
- Connector and Termi…



