Stiebel Eltron
Stiebel Eltron DHC 10-2 Classic 240/208V water heater part
Electric tankless water heater delivers hot water on demand at 240/208 V with a 0.8 gpm activation flow
- TypeWater Heaters
- Tankless design provides on-demand hot water without storage losses
- Operates on 240/208V single-phase power for standard electrical supply
- Activates at 0.8 gpm minimum flow for responsive heating
- Delivers water from 82 to 130°F for versatile temperature needs
- Compact 14.19 x 7.94 x 3.88 in size fits tight indoor spaces
Electric Tankless Water Heater 240/208V
The Stiebel Eltron DHC 10-2 Classic is an electric tankless water heater designed for indoor commercial environments. It operates on single-phase 240 or 208 volt AC power and delivers a maximum temperature of 130 degrees Fahrenheit. The unit activates at a minimum flow of .8 gallons per minute.
Electrical and Plumbing Compatibility
Verify that the installation site provides a dedicated 40 amp circuit at 240 or 208 volts single-phase. Confirm the cold water supply uses a 1/2 inch female NPT connection. Ensure local codes permit indoor electric tankless heaters with a power consumption of 9,600 watts.
Build Integration
The compact dimensions of 14.19 inches high, 7.94 inches wide and 3.88 inches deep allow placement in tight mechanical spaces. The heater frees up floor area otherwise occupied by a storage tank. It requires no adjustable thermostat and delivers water between 82 and 130 degrees Fahrenheit directly at the point of use.
Highlights
- Tankless design provides on-demand hot water without storage losses
- Operates on 240/208V single-phase power for standard electrical supply
- Activates at 0.8 gpm minimum flow for responsive heating
- Delivers water from 82 to 130°F for versatile temperature needs
- Compact 14.19 x 7.94 x 3.88 in size fits tight indoor spaces
Specifications
| Brand | STIEBEL ELTRON |
|---|---|
| Type | Water Heaters |
Questions about this item
What comes with the DHC 10-2 Classic unit and what must I supply?
The unit itself is included; you must provide 1/2 in NPT fittings, a 40 A circuit at 240/208 V, and suitable indoor mounting hardware.
How do I decide between the 240 V and 208 V supply options?
The heater operates on either voltage; choose the one that matches your building’s electrical service — 240 V delivers the full 9 600 W, while 208 V yields lower output.
What does the 9 600 W rating mean for actual hot-water delivery?
At 240 V the heater can raise water to a maximum of 130 °F with a minimum activation flow of .8 gpm; actual temperature depends on inlet temperature and flow rate.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



