Champion Power Equipment
Champion Power Equipment C90018 generator cover grey 2000 series
- Generators
$18.99
0.0002269BTC
In stock
Stens
Stens 758-058 1/4" PP Composite Spray Nozzle 0° Size 3.0 pressure washer part
A 0-degree red nozzle with a size 3.0 orifice produces a concentrated stream for removing stubborn debris from hard surfaces
- Zero-degree pattern blasts away stubborn debris
- Size 3.0 orifice matches compatible pressure washer pumps
- Red colour code identifies 0° spray angle instantly
- Composite construction resists corrosion during heavy use
- 1/4 inch connection fits standard pressure washer wands
Zero-Degree Nozzle For Hard Surfaces
This Stens 758-058 composite spray nozzle produces a zero-degree red jet rated at size 3.0 for concentrated cleaning power. It connects via a standard 1/4-inch fitting to compatible pressure washers. The narrow stream targets stubborn dirt and debris on hard metals, concrete and hardscape materials only.
Consistent Stream Under Continuous Use
The nozzle maintains a uniform rotational water pattern during extended operation without pressure drop-off. Its composite construction resists wear from the high-velocity stream better than basic plastic alternatives. Prolonged aiming at softer materials such as wood or siding will cause surface damage due to the extreme force concentration.
Simple Thread Installation
Installation requires threading the 1/4-inch connection onto the lance until hand-tight; no tools are needed for a secure seal. The most common error is selecting this zero-degree tip for delicate surfaces where a 15, 25 or 40-degree nozzle is appropriate. Always verify the surface hardness before spraying to prevent costly etching or gouging.
Highlights
- Zero-degree pattern blasts away stubborn debris
- Size 3.0 orifice matches compatible pressure washer pumps
- Red colour code identifies 0° spray angle instantly
- Composite construction resists corrosion during heavy use
- 1/4 inch connection fits standard pressure washer wands
Specifications
| Brand | STENS |
|---|
Questions about this item
How does the 3.0 orifice affect noise and heat when the pressure washer runs all day?
The 3.0 orifice size regulates flow; the pump motor determines noise and heat, not the nozzle itself.
What pressure washer fitting must I already own for the 1/4" connection to work?
A 1/4" quick-connect socket on the wand or lance is required for this nozzle to attach.
Will the 0° red nozzle damage softer materials if I keep using my older 15° or 25° tips for those jobs?
Yes, the 0° stream is for hard surfaces only; keep the 15° and 25° nozzles for wood, siding or painted areas.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
