STEINER
STEINER AWY88 Welding Curtain Wall 8 ft x 8 ft
An 8 ft by 8 ft welding curtain wall made of blue and yellow vinyl-laminated polyester that resists sparks and spatter up to 150 °F and meets California Fire Marshal approval
- TypeWelding Protection
- Tinted transparent window maintains visibility while filtering intense light
- Vinyl laminated polyester resists sparks and spatter at 150 °F
- 13 oz/sq yd fabric with .36 mm thickness blocks UV radiation
- California Fire Marshal approved for workplace safety compliance
- Grommets spaced 12 in apart enable quick installation on existing frames
Welding Curtain Wall 8 ft x 8 ft
The STEINER AWY88 is a welding curtain wall built from vinyl laminated polyester in blue and yellow. It measures eight feet wide by eight feet high and is rated to withstand temperatures up to 150 degrees F. The tinted transparent window lets supervisors monitor work without opening the barrier. Spark and spatter resistance plus California Fire Marshal approval make it suited for professional fabrication shops.
Curtain Design with Grommets
The curtain hangs from grommets spaced twelve inches apart along the top edge, allowing quick attachment to existing pipe frames or track systems. Vinyl laminated polyester coating resists UV degradation and abrasion while remaining flexible in cooler shops. At thirteen ounces per square yard and 0.36 mm thick, the material drapes flat to seal off bays without heavy structural supports. No floor mounting hardware is included.
Sustained Heat and Spark Exposure
Under continuous welding arcs the curtain maintains opacity and does not melt or drip at the rated 150 degree limit. Spark resistant fibres prevent burn-through during long MIG or stick sessions, while spatter resistant coating sheds molten droplets so they do not accumulate on the surface. The tinted window retains clarity after repeated thermal cycles, keeping visibility consistent for safety monitoring throughout a shift.
Highlights
- Tinted transparent window maintains visibility while filtering intense light
- Vinyl laminated polyester resists sparks and spatter at 150 °F
- 13 oz/sq yd fabric with .36 mm thickness blocks UV radiation
- California Fire Marshal approved for workplace safety compliance
- Grommets spaced 12 in apart enable quick installation on existing frames
Specifications
| Brand | STEINER |
|---|---|
| Type | Welding Protection |
Questions about this item
Will the 150 °F temperature limit hold up during long welding shifts?
The curtain is rated for a maximum of 150 °F, so sustained exposure above that temperature could degrade the vinyl laminated polyester.
Does the 13 oz/sq yd vinyl laminated polyester become noisy or hot when left hanging all day?
The material is a flexible fabric that does not generate noise or heat on its own; ambient conditions will determine surface temperature.
What mounting hardware do I need to install the grommets spaced 12 in apart on an 8 ft wide curtain?
You will need hooks, rings or a rod that match the 12 in grommet spacing and can support the curtain’s full 8 ft width.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
