STEINER
STEINER 535 Welding Screen 6 ft x 8 ft Blue Vinyl Polyester
A welding screen measuring six by eight feet with blue vinyl-laminated polyester rated to 150 degrees Fahrenheit, meeting California Fire Marshal and NFPA-701 standards
- TypeOthers
- Blue tinted transparency lets supervisors monitor welds safely
- Vinyl-laminated 13 oz polyester resists abrasion and rust
- NFPA-701 and California Fire Marshal approved for job-site compliance
- Withstands 150 Degrees F heat during extended welding operations
- 535 model screen ships new in 6 ft by 8 ft size
Welding Screen for Spark Containment
The STEINER 535 welding screen stands 6 ft high by 8 ft wide using blue polyester fabric with a vinyl-laminated coating. The material weighs 13 oz per square yard and measures .34 mm thick. It meets California Fire Marshal compliance and NFPA-701 approval. The frame uses 3/4 in tubing for structural support.
Suited for Fixed Welding Stations
This screen fits permanent workshop bays where a large, stationary barrier is required. The tinted transparent opacity allows visibility while blocking UV and spatter. Buyers needing a portable curtain or a smaller footprint for tight booths should consider other options. The fixed frame design does not fold or collapse for transport.
Vinyl-Laminated Polyester at 13 oz/sq yd
The screen material combines polyester with a vinyl laminate weighing 13 oz per square yard. This construction delivers abrasion resistance and rust resistance up to a maximum temperature of 150 degrees F. The weight and coating determine durability against heavy spatter and frequent use. Verify that this specification matches your shop safety requirements.
Highlights
- Blue tinted transparency lets supervisors monitor welds safely
- Vinyl-laminated 13 oz polyester resists abrasion and rust
- NFPA-701 and California Fire Marshal approved for job-site compliance
- Withstands 150 Degrees F heat during extended welding operations
- 535 model screen ships new in 6 ft by 8 ft size
Specifications
| Brand | Steiner |
|---|---|
| Type | Others |
Questions about this item
How do I assemble the 3/4 in frame tubes for the STEINER 535 screen?
Connect the 3/4 in frame tubes to form a 6 ft high by 8 ft wide rectangle, then attach the blue vinyl-laminated polyester screen using the integrated grommets or ties; the step often missed is securing every grommet so the 13 oz/sq yd material hangs flat without gaps.
What upkeep does the blue vinyl-laminated polyester screen need over time?
Wipe the 0.34 mm thick vinyl surface with mild soap and water to remove spatter; the abrasion-resistant and rust-resistant coating reduces wear, but replace the panel if the blue tint fades or tears compromise the California Fire Marshal and NFPA-701 compliance.
At what temperature does the screen material reach its limit during prolonged welding?
The screen is rated for a maximum temperature of 150 Degrees F; sustained heat above this level can degrade the vinyl lamination on the 13 oz/sq yd polyester before the frame or coating shows damage.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
