STEINER
STEINER 376 8 ft W 6 ft H 28 oz welding blanket
Fiberglass welding blanket measuring 8 ft by 6 ft with acrylic coating, rated to 1,000 °F and 28 oz/sq yd weight
- TypeWelding Protection
- Withstands 1,000 °F for heavy-duty welding protection
- Acrylic-coated fibreglass resists abrasion, sparks and spatter
- FM Approved certification confirms safety compliance
- 05 in thick, 28 oz/sq yd material balances durability and handling
- Grommets on 24 in centres allow secure fastening
Welding blanket for spark and spatter protection
The STEINER 376 blanket uses a fiberglass base with an acrylic coating to shield surrounding areas during welding work. It measures 8 ft by 6 ft and weighs 28 oz per square yard, providing a large continuous barrier. The material is rated for temperatures up to 1,000 degrees F and carries FM Approved certification for fire performance.
Medium duty rating defines capacity and limits
Rated for medium duty, the blanket comfortably handles routine spark, spatter and abrasion exposure in general fabrication or maintenance tasks. The 0.05 in thickness gives a practical heat barrier for short-term contact, but it is not intended for sustained heavy industrial loads or direct flame impingement beyond the rated maximum. Users needing continuous high-heat shielding or heavier material weight will find the medium rating insufficient.
Grommeted edges aid positioning and heat management
Grommets at each corner spaced 24 in apart allow the blanket to be hung or secured flat, promoting airflow that helps dissipate heat during normal use. The fiberglass and acrylic construction does not generate noise and draws no power, making thermal behaviour passive. In typical welding scenarios the surface resists ignition and limits heat transfer to the protected side.
Highlights
- Withstands 1,000 °F for heavy-duty welding protection
- Acrylic-coated fibreglass resists abrasion, sparks and spatter
- FM Approved certification confirms safety compliance
- 05 in thick, 28 oz/sq yd material balances durability and handling
- Grommets on 24 in centres allow secure fastening
Specifications
| Type | Welding Protection |
|---|---|
| Brand | STEINER |
Questions about this item
Will the 28 oz/sq yd fiberglass blanket with 0.05 in thickness withstand sparks from my older MIG welder?
The blanket is rated for 1,000 Degrees F and is spark resistant, spatter resistant and abrasion resistant, so it will protect surfaces from an older MIG welder.
How can I verify the 24 in grommet spacing is correct after I hang the 8 ft by 6 ft blanket?
Measure between the two grommets on each corner; they should be 24 in apart, and the blanket should cover an 8 ft width by 6 ft height area.
Does the STEINER 376 blanket include mounting hardware or do I buy hooks separately?
The blanket has grommets in each corner for fastening; hooks, chains or ropes are not included and must be purchased separately.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
