We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Square tan fiberglass welding blanket with corner grommets

STEINER

STEINER 372 Welding Blanket 6 ft x 6 ft 18 oz/sq yd

SKU CH-RMDM-SMHCJ

Fiberglass welding blanket measuring six feet by six feet withstands 1,000 degrees Fahrenheit and resists sparks and abrasion

  • TypeWelding Protection
  • Withstands 1,000 °F for heavy-duty protection
  • FM Approved standard confirms safety compliance
  • 18 oz/sq yd fiberglass resists sparks and abrasion
  • 04 in thick yet flexible for easy handling
  • Grommets spaced 24 in on every corner for secure fastening

Welding Protection Blanket 6 ft x 6 ft

The STEINER 372 welding blanket measures six feet by six feet and uses uncoated fibreglass rated to one thousand degrees Fahrenheit. It is built for light-duty shielding during welding, cutting or hot-work tasks where spark and spatter containment is required.

Thermal Rating and Noise-Free Operation

The fibreglass construction withstands continuous exposure up to one thousand degrees Fahrenheit without melting or dripping. With no moving parts or power draw the blanket operates silently and adds zero electrical load to the workspace.

Grommet Mounting and Heat-Cleaned Finish

Two grommets on each corner spaced twenty-four inches apart allow quick hanging from hooks, chain or wire. The heat-cleaned surface reduces loose fibres and the FM Approved rating confirms the material meets recognised fire-test standards for light-duty use.

Highlights

  • Withstands 1,000 °F for heavy-duty protection
  • FM Approved standard confirms safety compliance
  • 18 oz/sq yd fiberglass resists sparks and abrasion
  • 04 in thick yet flexible for easy handling
  • Grommets spaced 24 in on every corner for secure fastening

Specifications

BrandSTEINER
TypeWelding Protection

Questions about this item

How do I hang the 6 ft by 6 ft fiberglass blanket using the corner grommets, and what spacing mistake should I avoid?

Thread ties or hooks through the two grommets in each corner; the grommets are spaced 24 in apart, so do not assume they are centered on the edge.

What upkeep will the uncoated 18 oz/sq yd fiberglass need after repeated spark exposure?

Shake off loose slag and brush the surface; the heat-cleaned, abrasion-resistant material tolerates 1,000 °F, but inspect for thinning at the 0.04 in thickness after heavy use.

At what point does the light-duty FM Approved blanket reach its limit during continuous high-heat work?

Sustained temperatures above 1,000 °F will exceed the rated maximum and degrade the fiberglass first.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.