STEINER
STEINER 372-6X8 Welding Blanket 8 ft W 6 ft H 18 oz
Fiberglass welding blanket measuring 8 by 6 feet withstands 1,000 °F and resists sparks and abrasion
- TypeWelding Protection
- Withstands 1,000 °F continuous heat for safe welding operations
- Uncoated 18 oz/sq yd fiberglass resists sparks and abrasion
- FM Approved certification confirms fire-safety compliance
- 8 ft by 6 ft coverage shields large work areas
- Corner grommets spaced 24 in apart allow secure fastening
Welding blanket with 1,000 °F rating
This STEINER welding blanket is a fiberglass protective barrier rated for temperatures up to 1,000 degrees Fahrenheit. It measures 8 feet wide by 6 feet high and weighs 18 ounces per square yard. The uncoated tan material is 0.04 inches thick and carries FM Approved certification. Grommets on each corner spaced 24 inches apart allow secure fastening.
Replaces lighter or unrated fire blankets
The jump is worth it when a worksite requires a light-duty blanket that can withstand sustained heat and spark exposure while meeting FM Approved standards. It upgrades from basic canvas or uncertified covers that may char or ignite under similar conditions. The heat-cleaned fiberglass resists abrasion and sparks without a coating that can degrade.
Fits welding bays and fabrication areas
The blanket hangs from its corner grommets to shield walls, equipment or personnel from spatter and radiant heat. Its 0.04-inch profile adds minimal bulk so it drapes easily over frames or curtains. The fiberglass construction frees the user from replacing coatings that wear off, while the grommet spacing works with standard hooks or tie-downs.
Highlights
- Withstands 1,000 °F continuous heat for safe welding operations
- Uncoated 18 oz/sq yd fiberglass resists sparks and abrasion
- FM Approved certification confirms fire-safety compliance
- 8 ft by 6 ft coverage shields large work areas
- Corner grommets spaced 24 in apart allow secure fastening
Specifications
| Type | Welding Protection |
|---|---|
| Brand | STEINER |
Questions about this item
What spacing do the corner grommets use for mounting?
Grommets are placed 24 in apart on each corner, giving four attachment points per side for ropes or hooks.
How do you hang the 18 oz/sq yd fiberglass blanket without tearing the grommets?
Thread tie-downs through all four corner grommets first, then tension evenly; the 0.04 in thick material distributes load when all points share the weight.
When does the uncoated tan fiberglass need replacement?
Replace it once the surface shows fraying, thinning below the original 0.04 in thickness, or loses its spark-resistant and abrasion-resistant performance.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
