STEINER
STEINER 367-8X8 Welding Blanket Fiberglass 8 ft 32 oz/sq yd
Fiberglass welding blanket measuring eight by eight feet with a 32 oz/sq yd rating, 0.08 in thickness, grommets every 24 in, and FM-approved spark and spatter resistance
- TypeWelding Protection
- Withstands 1,000 °F for heavy-duty spark protection
- Medium-duty 32 oz/sq yd fibreglass resists abrasion and spatter
- FM Approved certification confirms fire-retardant performance
- Eight-foot square coverage shields large work areas
- Corner grommets spaced 24 in allow secure fastening
What this blanket is and who needs it
This STEINER 367 welding blanket measures 8 ft by 8 ft and uses uncoated fiberglass rated to 1,000 Degrees F. It is built for medium-duty protection during welding, cutting or hot-work tasks where sparks and spatter must be contained. The white 35 oz/sq yd fabric includes grommets on each corner for secure hanging.
Behaviour under sustained heat
The fiberglass material resists abrasion, sparks and spatter continuously at its rated temperature rather than only in brief bursts. FM Approved certification confirms the blanket meets a recognised fire-test standard for ongoing exposure. At 0.08 in thick the cloth maintains its barrier properties through repeated shifts without melting or dripping.
Check your workspace before ordering
Verify that an 8 ft square coverage area matches the zone you need to shield and that anchor points can accept the corner grommets spaced 24 in apart. The blanket weighs 32 oz/sq yd, so ensure the mounting structure can support the full panel when hung vertically. No coating means the surface stays fiberglass-white; confirm that colour suits your site marking rules.
Highlights
- Withstands 1,000 °F for heavy-duty spark protection
- Medium-duty 32 oz/sq yd fibreglass resists abrasion and spatter
- FM Approved certification confirms fire-retardant performance
- Eight-foot square coverage shields large work areas
- Corner grommets spaced 24 in allow secure fastening
Specifications
| Brand | STEINER |
|---|---|
| Type | Welding Protection |
Questions about this item
Does the 0.08 in thick fiberglass blanket resist heat buildup during all‑day welding?
The uncoated fiberglass is rated for continuous exposure up to 1,000 °F and is spark‑ and spatter‑resistant, so it handles prolonged heat without degrading.
What mounting points does the 8 ft by 8 ft blanket need to stay in place?
Each corner has two grommets spaced 24 in apart, so you only need hooks, bolts or wire through those eight grommets to secure it.
Will the 35 oz/sq yd medium‑duty blanket damage painted or finished surfaces it rests against?
The material is abrasion‑resistant but uncoated; use a soft barrier if the workpiece has a delicate finish that could be marked by the fiberglass texture.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
