STEINER
STEINER 367-4X6 Welding Blanket 6 ft x 4 ft 35 oz/sq yd
Fiberglass welding blanket measuring six by four feet withstands 1,000 degrees Fahrenheit and resists sparks, spatter and abrasion
- TypeWelding Protection
- Withstands 1,000 °F to shield work areas from intense heat
- Uncoated 35 oz/sq yd fiberglass resists abrasion, sparks and spatter
- FM Approved certification confirms reliable fire protection
- Corner grommets on 24 in spacing allow quick, secure mounting
- Medium-duty 0.08 in thickness balances durability and easy handling
6 ft × 4 ft welding blanket
This STEINER welding blanket measures six feet by four feet and uses a fibreglass protective material weighing 35 oz/sq yd with a thickness of 0.08 in. The uncoated white fabric withstands temperatures up to 1 000 degrees F and carries FM Approved certification for medium-duty use. Grommets at each corner provide secure fastening points.
For spark and spatter protection
The blanket suits workshops needing abrasion-resistant, spark-resistant and spatter-resistant coverage during medium-duty welding tasks. Buyers requiring a coated surface, a higher temperature rating or a heavier weight material should look at alternative products. The 24 in grommet spacing may not match every mounting configuration.
Fits around the work area
The 6 ft by 4 ft dimensions cover a generous zone while the corner grommets let you hang or tie the blanket to frames, scaffolding or equipment. Uncoated fibreglass keeps the material pliable for draping over irregular shapes. The 35 oz/sq yd weight stays in place without excessive bulk.
Highlights
- Withstands 1,000 °F to shield work areas from intense heat
- Uncoated 35 oz/sq yd fiberglass resists abrasion, sparks and spatter
- FM Approved certification confirms reliable fire protection
- Corner grommets on 24 in spacing allow quick, secure mounting
- Medium-duty 0.08 in thickness balances durability and easy handling
Specifications
| Brand | STEINER |
|---|---|
| Type | Welding Protection |
Questions about this item
What mounting points do I need on my work area to hang the 6 ft by 4 ft blanket using its corner grommets?
The blanket has two grommets on each corner spaced 24 in apart, so you need anchor points that match those locations on a 6 ft by 4 ft rectangle.
Will the uncoated fiberglass material rated for 1,000 Degrees F protect adjacent older equipment from weld spatter and sparks?
Yes, the blanket is spark resistant, spatter resistant and abrasion resistant, and its 0.08 in thick fiberglass construction is rated to 1,000 Degrees F for medium-duty shielding.
How can I confirm the blanket meets the FM Approved standard after I install it?
Look for the FM Approved marking on the white fiberglass material and verify the weight is 35 oz/sq yd and thickness is 0.08 in as specified.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
