STEINER
STEINER 367-10X10 Welding Blanket 10 ft x 10 ft 32 oz/sq
Fiberglass welding blanket measuring 10 ft by 10 ft with 32 oz/sq weight and 0.08 in thickness, rated to 1,000 °F and FM Approved
- TypeWelding Protection
- Withstands 1,000 °F for heavy welding protection
- 10 ft x 10 ft coverage shields large work areas
- 32 oz/sq ft fiberglass resists sparks and spatter
- Grommets on 24 in centres allow secure fastening
- FM Approved rating confirms tested fire resistance
Welding Blanket for Spark Protection
The STEINER 367-10X10 welding blanket measures 10 ft by 10 ft and uses uncoated fiberglass rated to 1,000 degrees F. It provides a white, medium-duty barrier against sparks, spatter and abrasion during hot-work tasks.
FM-Approved Build with Corner Grommets
The fabric weighs 35 oz/sq yd and is 0.08 in thick with grommets placed two per corner on 24 in spacing. These reinforced holes allow secure hanging or anchoring so the blanket stays in position while you weld or cut.
Check Clearance and Mounting Points
Verify you have a 10 ft by 10 ft area to cover and suitable anchor points for the grommets before ordering. This blanket is not designed for continuous exposure above its rated temperature or for applications requiring a coated surface.
Highlights
- Withstands 1,000 °F for heavy welding protection
- 10 ft x 10 ft coverage shields large work areas
- 32 oz/sq ft fiberglass resists sparks and spatter
- Grommets on 24 in centres allow secure fastening
- FM Approved rating confirms tested fire resistance
Specifications
| Brand | STEINER |
|---|---|
| Type | Welding Protection |
Questions about this item
What does the FM Approved standard mean for the 1,000 °F temperature rating?
The blanket is tested to withstand continuous exposure up to 1,000 °F and meets Factory Mutual fire-protection criteria for welding and hot-work environments.
How much space is needed to mount the 10 ft × 10 ft blanket with its corner grommets?
The blanket measures 10 ft by 10 ft and has two grommets in each corner; allow at least that footprint plus clearance for tie-downs or hooks.
What is the correct way to hang the blanket using the 24 in grommet spacing?
Run rope or wire through the grommets spaced 24 in apart along the edges, securing all points so the 0.08 in thick fiberglass hangs flat without sagging.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
