We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Handheld TPMS tool with four sensors 315 433MHz

Steelmate Group

Steelmate Group SPT100 TPMS tool with 4 sensors 315+433MHz

SKU CH-GFAH-VH2Q6

TPMS tool activates, programs and diagnoses tyre-pressure sensors and includes four 315/433 MHz sensors

  • Reads sensor ID, pressure, temperature and battery status
  • Activates most OE and universal TPMS sensors
  • Four programming modes: auto-create, copy by activation, copy by OBD, copy by manual ID input
  • Includes four 315/433 MHz sensors ready for installation
  • Diagnoses TPMS faults via OBD II connection

TPMS Tool with Four Sensors

The Steelmate SPT100 is a dedicated tire-pressure monitoring tool supplied with four sensors operating on 315 and 433 MHz frequencies. It is designed for technicians and vehicle owners who need to activate, program, diagnose and relearn TPMS sensors across a wide range of makes and models. The kit supports OE and universal sensors and includes OBD connectivity for fault-code reading.

Handheld Operation and Power

The unit is a portable handheld device powered by the vehicle's OBD II port during diagnostic use, so no separate battery charging is required for that function. Sensor activation and programming are performed through the tool's interface, with the process guided by on-screen prompts for the selected make, model and year. Normal use involves low power draw from the vehicle and silent operation.

Dual-Frequency Sensor Compatibility

The included sensors transmit on both 315 MHz and 433 MHz bands, which determines whether the kit matches the vehicle's original equipment specification. Buyers must confirm their vehicle uses one of these two frequencies; the tool cannot support sensors outside these bands. It is not for users whose vehicles require a single-frequency sensor that differs from the supplied pair.

Highlights

  • Reads sensor ID, pressure, temperature and battery status
  • Activates most OE and universal TPMS sensors
  • Four programming modes: auto-create, copy by activation, copy by OBD, copy by manual ID input
  • Includes four 315/433 MHz sensors ready for installation
  • Diagnoses TPMS faults via OBD II connection

Specifications

No published specifications for this item yet.

Questions about this item

How do I install the four 315 and 433 MHz sensors so the SPT100 tool recognises each wheel position?

Mount one sensor per wheel, then use the tool's auto-create or copy-by-activation mode while following the on-screen make, model and year prompts; the tool pairs each sensor ID to the correct corner as you activate them in sequence.

What maintenance will the included sensors need over time?

Each sensor has an internal battery that cannot be replaced; when the tool reports low battery voltage during a sensor check, the whole sensor must be swapped for a new 315 or 433 MHz unit.

What is the first limitation I will hit when using the SPT100 continuously for multiple vehicles?

The handheld runs on its own rechargeable battery; extended back-to-back programming sessions will drain it, so you must pause to recharge before continuing.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.