Peerless Industrial Group
Peerless Industrial Group Tire Chains Single Bus & RV V-Bar PK2 QG2821
$67.99
0.00080949BTC
In stock
Steelman
Steelman 97989 Air Inflator Body with 18" Reinforced Rubber Whip Hose
Build a custom inflator using this body with an 18-inch reinforced rubber hose rated to 300 PSI, brass bleeder valve, and angled swivel tip
- ColorTransparent
- Custom inflator build with gauge you choose
- 18-inch reinforced rubber hose handles 300 PSI working pressure
- Brass bleeder valve for precise pressure adjustment
- Angled swivel tip gives better valve-stem access
- Standard 1/4-inch NPT threads accept common gauges
Inflator Body with 18-Inch Whip Hose
The Steelman 97989 provides a modular air inflator body fitted with an 18-inch reinforced rubber whip hose rated for 300 PSI working pressure. It accepts standard 1/4-inch NPT gauges so users can attach their preferred analog or digital readout. The factory-mounted push-on tip swivels for easier valve-stem access. Gauge is not included.
Sustained High-Pressure Use
The fiber-reinforced hose handles continuous pressures up to 300 PSI, making it suitable for daily automotive inflation tasks and higher-pressure tire requirements. A brass bleeder valve allows precise pressure release by thumb or forefinger during extended filling sessions. The swivel tip maintains alignment under load, reducing hose fatigue at the connection point.
Build Quality and Daily Connections
Transparent body construction lets operators confirm internal component seating at a glance. The 1/4-inch NPT gauge port and 1/4-inch base threads use common shop fittings, so existing air lines and gauges connect without adapters. Reinforced rubber hose resists abrasion and kinking during repeated coil and uncoil cycles in garage environments.
Highlights
- Custom inflator build with gauge you choose
- 18-inch reinforced rubber hose handles 300 PSI working pressure
- Brass bleeder valve for precise pressure adjustment
- Angled swivel tip gives better valve-stem access
- Standard 1/4-inch NPT threads accept common gauges
Specifications
| Brand | STEELMAN |
|---|---|
| Color | Transparent |
Questions about this item
How much pressure can the 18-inch reinforced rubber whip hose handle during all-day use?
The fiber-reinforced hose is rated for working pressures up to 300 PSI, making it suitable for standard automotive and higher-pressure tire inflation tasks.
What gauge thread does the inflator body accept so I can use my existing gauge?
The gauge mount uses standard 1/4-inch NPT threads, allowing you to attach any compatible digital or analog pneumatic gauge you already own.
Will the 1/4-inch NPT base on this inflator body connect to my current shop air hose?
Yes, the base is threaded 1/4-inch NPT, matching the common fitting on most shop air hoses and couplers for a direct connection.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
