Peerless Industrial Group
Peerless Industrial Group Tire Chains Single Bus & RV V-Bar PK2 QG2821
$67.99
0.00081739BTC
In stock
Steelman
Steelman 78760 8-piece wheel hanger set for European lug bolts
Eight wheel hangers simplify European lug-bolt changes by supporting the wheel while bolts are started
- Prevents back strain by holding wheels during lug bolt installation
- Eight hangers cover multiple European makes including BMW and Mercedes
- Anodized aluminum construction resists corrosion during repeated use
- Colour-coded threads simplify matching M12×1.5 and M14×1.5 sizes
- Fits existing lug holes for fast, aligned tyre mounting
Eight hangers for European lug bolts
The Steelman 78760 set supplies eight wheel hangers built for vehicles that use lug bolts rather than studs and nuts. Each anodized aluminium tool slides through the existing lug holes so a wheel and tyre can be held in place while the first bolts are started. The kit covers thread sizes found on select BMW, Mini, Mercedes, Saab, Smart, Volkswagen, Audi, Porsche and Volvo models.
Replaces holding the wheel by hand
Without the hangers the installer must support the full wheel weight while aligning the bolt holes, which strains the back and slows the job. The colour coded hangers remove that load immediately and let one person mount a wheel without fumbling for the first bolt. The upgrade is worth it whenever European lug bolt patterns are encountered regularly.
Limited to listed thread pitches
The black hanger measures 12.6 mm with an M12 x 1.5 thread while the remaining seven hangers measure 15 mm and carry M14 x 1.5 or M14 x 1.0 threads. Vehicles using different diameters, pitches or stud type hubs cannot use these tools. The kit also carries a California Proposition 65 warning for chemicals known to cause cancer and reproductive harm.
Highlights
- Prevents back strain by holding wheels during lug bolt installation
- Eight hangers cover multiple European makes including BMW and Mercedes
- Anodized aluminum construction resists corrosion during repeated use
- Colour-coded threads simplify matching M12×1.5 and M14×1.5 sizes
- Fits existing lug holes for fast, aligned tyre mounting
Specifications
| Brand | STEELMAN |
|---|
Questions about this item
What lug-bolt thread sizes do the eight hangers cover?
The kit includes one black hanger with M12 x 1.5 thread and seven 15 mm hangers covering M14 x 1.5 and M14 x 1 threads for the listed European makes.
How do you install a hanger without cross-threading the bolt hole?
Slide the correct colour-coded hanger through the wheel lug hole, hand-tighten it into the hub thread until snug, then mount the wheel onto the hanger before removing the tool and torquing the remaining bolts.
When should a hanger be replaced?
Replace any hanger that shows stripped threads, bent shank, or worn anodised finish so it can no longer hold the wheel securely during mounting.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
