Steelman
Steelman 60025 Cooling System Test and Purge Kit 22 caps 35 PSI
Performs cooling-system pressure and leak tests with 22 caps and a 0-35 PSI gauge, plus vacuum refill to prevent air lock
- TypeAutomotive Service & Shop Tools
- 22 test caps cover Ford, GM, BMW, Toyota and many more
- Built-in 0-35 PSI gauge on 21-inch hose for accurate leak checks
- Vacuum refill pump removes air to prevent coolant system air lock
- Color-coded cap stripes speed up correct adapter selection
- Blow-molded plastic case keeps all components organized and protected
Master Cooling System Test and Purge Kit 60025
The STEELMAN 60025 kit provides 22 test caps for pressure and leak testing on a wide range of foreign and domestic vehicles. It includes a pressure pump with a built-in 0-35 PSI gauge and a 21-inch hose for inspecting radiators, heater cores, head gaskets, headers, and water pumps. A vacuum refill pump removes air from the system during coolant refills to prevent air lock. Color-coded stripes on the nylon caps simplify identification.
Thermals Noise and Power Draw
This is a manual hand-tool kit with no electrical components, so it produces no operational noise, draws no power, and generates no heat during normal use. The pressure pump is operated by hand to reach the 35 PSI limit shown on the integrated gauge. The vacuum refill pump also runs on manual suction. There are no motors, fans, or batteries to manage.
Sustained Load Behaviour
Under sustained testing the kit maintains pressure as long as the cooling system holds it, allowing extended leak inspection without pressure decay from the tool itself. The blow-moulded plastic case keeps all 22 caps and both pumps organised for repeated workshop use. The manual includes a detailed list of compatible makes and models for each adapter cap. California Proposition 65 warnings apply for cancer and reproductive harm.
Highlights
- 22 test caps cover Ford, GM, BMW, Toyota and many more
- Built-in 0-35 PSI gauge on 21-inch hose for accurate leak checks
- Vacuum refill pump removes air to prevent coolant system air lock
- Color-coded cap stripes speed up correct adapter selection
- Blow-molded plastic case keeps all components organized and protected
Specifications
| Brand | STEELMAN |
|---|---|
| Type | Automotive Service & Shop Tools |
Questions about this item
How do I attach the correct adapter cap from the 22 included to my vehicle's radiator neck?
Match the color-coded stripe on the nylon cap to the application list in the manual, press the cap onto the radiator or reservoir neck, then connect the 21-inch hose from the pressure pump to the cap's quick-connect fitting.
Which components in the 60025 kit will need periodic replacement after repeated shop use?
The rubber seals on the 22 adapter caps and the hose washer on the 21-inch pressure-pump hose are the wear items; replace them when they no longer hold 35 PSI without leaking.
What is the maximum pressure the built-in gauge on the hand pump can indicate during a sustained leak test?
The gauge reads 0-35 PSI, so 35 PSI is the highest pressure you can verify; the test should not exceed this limit.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
