Steelman
Steelman 50049-WMQ-IND 25 ft air hose with reusable quick disconnect
A 25 ft straight air hose with reusable quick disconnect fittings, abrasion-resistant polyurethane construction and 100 PSI working pressure
- 25 ft length reaches tools across the garage or workshop
- Polyurethane construction resists abrasion better than rubber or nylon
- Kink-resistant tubing withstands twisting and crushing on rough floors
- 25 % lighter than equivalent rubber hose for easier handling
- Reusable brass fittings connect to 1/4-inch NPT quick connects and compressors
Garage reach and tool compatibility
The STEELMAN 50049-WMQ-IND is a 25-foot straight air hose built for pneumatic tools in garages and workshops. Its 3/8-inch internal diameter supplies standard compressed air to impact wrenches, ratchets and spray guns. Reusable brass fittings with a universal AMT style quick connect attach directly to 1/4-inch NPT ports on compressors and adapters. The polyurethane construction is 25 percent lighter than equivalent rubber hoses for easier handling.
Pressure ceiling and fitting constraint
Working pressure is rated to 100 PSI, so the hose suits typical shop compressors but not high-pressure specialist systems. The pre-attached 1/4-inch NPT brass ends limit connection options to matching quick connects and adapters without extra fittings. The straight, uncoiled design prevents automatic retraction, requiring manual storage. California Proposition 65 warnings apply for chemicals known to cause cancer and reproductive harm.
Length fit and durability envelope
At 25 feet the hose reaches across most single-bay workspaces while keeping pressure drop low for common air tools. Abrasion-resistant polyurethane withstands dragging over bare concrete and resists kinking, twisting and crushing better than rubber or nylon. It is not suited for runs longer than 25 feet or for permanent outdoor exposure where UV degradation could shorten service life.
Highlights
- 25 ft length reaches tools across the garage or workshop
- Polyurethane construction resists abrasion better than rubber or nylon
- Kink-resistant tubing withstands twisting and crushing on rough floors
- 25 % lighter than equivalent rubber hose for easier handling
- Reusable brass fittings connect to 1/4-inch NPT quick connects and compressors
Specifications
| Brand | STEELMAN |
|---|
Questions about this item
Which length and fitting style should I choose for this Steelman air hose?
The 50049-WMQ-IND is a 25 ft straight hose with reusable 1/4-inch NPT brass and quick-connect fittings already attached.
What does the 100 PSI working-pressure rating mean when I am running tools in the shop?
The hose is rated for compressed-air pressures up to 100 PSI, so it will deliver that pressure to your pneumatic tools without bursting.
How does the 1/4-inch NPT quick-connect interface limit what I can plug in?
The pre-attached fittings accept standard 1/4-inch NPT quick connects, adapters and compressors, so any tool or accessory with that thread will connect directly.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
